Questions & Answers for: Vivitar flashing

...Any ideas? Hello, Check dirty contacts. Do this test: Fresh 4 batteries Turn on and wait until flashing Green Light. With insulated wire, both ends stripped to 1/4" of bare wire, short one end

Older Vivitar Flash for new Canon SX10 I have two older flashes: Vivitar Zoom Thyristor 3500 and Vivitar Auto Thyristor 550FD. I am getting a new Canon SX10. Will either of these flashes be compatible

Hi my name is Curtis can you tell me IF my Vivitar 283 flash will work on my c-750 Olympus, TTL camera it have an hot shoe,but flash don,t fire. I have talked to Olympus about it(on answer). I took it

How do I turn on the flash on 8025 1. Touch the flash function area (lightning bolt with downward-pointing arrow) until the flash icon with the "A" shows up on the left side of the display. This ...

How do make the flash work? Good day, click the link below and download manual. hope it will help to your problem. users manual thank you. Flash In low light conditions it is best to use the built-in ...

I cannot find where to turn on the flash when in photo mode press left switch side of ok will see in screen ( on right hand side) flash sign in off mode, press switch (not ok) to alter flash to auto ...

Vivitar series1 Pro-648-CAN. The camera and flash attached were dropped. The flash seperated from the camera. Nothing visually broken or damaged. Reattached the flash and the pictures are VERY over ...

cannot work flash If the flash indicates but there is no response on the flash then it is a failure of the flash unit within the camera. You will need open only if you are familiar to deal with such ...

how do i get the flashed turned on First, check to make sure you're not in the macro mode. There's a slide switch on the end of the camera, near the SD card slot. Slide the switch away from ...

How to get vivitar pro 548 series 1 to work on nikon d90 flash comes on an all but wont flash. The TTL contacts on the Nikon are different to the Vivitar.You can put a remote flash trigger in the ...