...other parts stores with scanners will do this for you as a free service. You need a scan tool to erase the codes and reset the light. Any auto parts store such as autozone can do that for ya for
...chevy malibu I replaced icm and coil still have same fault Was the code P1352 (ERASED) after the repairs were made? After all repairs are made for any (DTC) the code must be must be erased from the ...
...erase the code and see if it comes back on some of the newer cars It could be the start of a throttle valve body problem with moist getting into your engine here is the solution. You have a build up ...
...erase all the codes the only other way I know of is to erase them with a code reader. normally once the problem is corrected,, a restart of the car clears a code ,, if not,, Unhook the positive ...
Question about 2010 Malibu
...codes and erase them. When i hooked it up to my car, it says a message that this instrument cannot communicate with the vehicle system. what should i check and how do i solve this issue? is there a ...
...Chevy Malibu 3.1 Code P0502 The error code is telling me Speed sensor A Low Voltage I replaced the output speed sensor on the transmission. Also I was getting a code originally saying that the front ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions