...to be useful. You need to replace the electric door lock solenoid.The electrical part of the solenoid may be compromised and is not letting the solenoid arm retract or extend to lock/unlock your
...door locks should work at the same time by the door lock motors electrically. If you have to manually unlock the door because it will not lock or unlock by the lock motor, you need a door ...
Question about 2000 Focus
Electric door locks acuator failed first time in 3/2006. Was able to lock all doors manually. Front driver's door acuator replaced and recall for rear passenger door latch corrosion (recall work) done
...door locks no longer all lock at once. No matter if the key is used, or any of the interior door lock buttons are pushed or pulled. The doors WILL lock but each lock now needs to be activated ...
...Nissan Altima GLE. Electric door locks do not stay locked in hot weather. Door locks will click erratically even when car is in motion. This includes all 4 doors. The electric door lock is
...electric solenoid and door lock to the locking mechanism has either fallen apart inside the door or also possibly it has gotten "over-center" and cannot operate properly from either the automatic ...
...electric door lock won't disengage The electric door lock won't disengage on the drivers side door. My grandson was playing with it, locking and unlocking repeatedly. Apparently he burned out the ...
Question about 1998 Mountaineer
...to find the slot number in the fuse panel for the electric door lock on a 1998 Mountaineer. The electric lock switch on the drivers door isn't getting juice to open or lock the door locks. no. ...
Question about 2000 Montana
...lubed the lock assembly and are happy with it's operation.If it's an electric lock fail to unlock/lock,with the door open use steel wool on the door post electrical door contact pads once in a
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions