Questions & Answers for: egr pipe

...to 30 N.m (22 lb ft). Connect the exhaust pipe assembly to the EGR valve. Reinstall the exhaust pipe bolt. Tighten Tighten the nuts to 30 N.m (22 lb ft). Connect the EGR valve electrical ...

...EGR pipe will require part # 12602507. To replace the original EGR pipe that came factory installed on your vehicle (designed & manufactured by Delphi) had a major falw and is no longer available ...

...Tighten the bolts to 30 N.m (22 lb ft) 3. Connect the pipe assembly to the EGR valve. 4. Install the bolt. Tighten Tighten the bolts to 30 N.m (22 lb ft) . Connect the EGR valve electrical

...to know if the exhaust pipe goes between the egr and the upper manifold NO IT GOES UNDER THE INTAKE AND EGR ON TOP BOLTS GO THRU EGR THEN INTAKE AND INTO PIPE SANDWICHES THE INTAKE BETWEEN EGR AND ...

...pipe may be the egr tube, follow the pipe and see if it goes to egr or head, if it does then replace the pipe,heres a picture of it. if this is it then it is the egr tube and it costs about

...EGR valve, that pipe gets clogged with soot. You need to clean out with carb cleaner and a brush or piece of wire. Soak it and reinstall. EGR also has a vacuum line to it, make sure that is still ...

...SE? I dont think it has one... there is a sensor on the egr pipe that telsl the computer if the egr is operating or not. Its the PDFE sensor, it looks like a little box with 2 hoses on the egr

...pipe leading to the EGR. This sensor measures the pressure difference (differential) in the two pipes when the EGR is open; the more open the EGR the more the pressure imbalance detected by the DPFE. ...

...egr pipe to 4.2 turbo diesel patrol, do I need to removed the turbo and other parts to fit the pipe or does it fit in with everything still mounted. any suggestions will be greatly appreciated. I ...

pipe from the EGR value was lying loose. I know that it's needs to be connected to the intake manifold, but can't find the spot. Should be a vaccum hose for the top and should just mount on the plenum