Questions & Answers for: Hoshizaki drop into water

not dropping ice Freon good water pump runs till float switch next to it tapped seems to be sticking than goes tru cycle rev. heat into tray but makes no ice - could it be circuit board or valve ...

...fills in the fill time allowed . then it makes ice until the water is used up and the float switch drops and the cubes are little slices. you can adjust the size of cubes you want by raising or ...

...that water is leaking from my KM-500MAE. Part of this water is dripping onto the ice cubes that are dropped into the collection area inside the machine which is making them melt. It is also dripping ...

...you will not notice. When the water level in the sump gets low enough, it goes into a harvest and drops small slivers of ice. I'd check that out first. Hope this helps. level of refrigerant R404A ...

drop that could be anything from a dirty condenser to dirty plates to bad ice thickness control. Run some ice machine cleaner through it and blow the condenser out. You need to look a litli further to

...Are the distribution tubes in place? Are all the water tubes secure? Is the drop grids in place? Is the sump drain plug in correctly and tight? Start there and let me know if we need to go

hello i have a hoshizaki ice machine model km250mae. after a cleaning the ice harvest cycle dropped from 17-20 minutes to 39-42 minutes . don't know what to do , i have askes a couple of tech's,but no

...to keep sediment out. If it is bad, the unit will have short freeze cycles as the the valve is leaking water out causing the float to drop prematurely and causing small cubes and short freeze

Hoshizaki model AM50BAE not dropping ice... Water dripping inside..can hear water filling up but no ice cubes forming and dropping in bin Replace water float and check water inlet valve. with water ...

...switch. Most all Hoshi machines have adjustable floats. It starts the harvest as the water level