Questions & Answers for: door springs

...out, thats why its hard to adjust If you do not have the proper tension on your springs, your door can be very dangerous, Sounds like the tension is wrong. Call someone to do it before you get ...

door spring on washer door spring on my whirlpool 800 awm820 spring has gone,,have bought a new one ,but having trouble putting it back on the washer door. Is posible that you need to remouve the door

...springs for the door, one is a little longer that the other. The GE parts calls one a ''heavy duty'' spring, and the other simply ''door spring''. A cable on each side attaches to the springs and ...

...door with a bar running through it) then look for a gap in the spring. If you have a broken spring you should call a qualified technician as the springs carry a lot of tension and can be very ...

...a pully and cable, then these can easily be replaced yourself. Check that cables are connected to the springs and the door and that one didn't break or come loose or cable off pully and

door springs DOOR WONT STAY SHUT HOW DO YOU LOCATE THE DOOR SPRINGS If the door won't stay shut the issue is with the door catch not the door springs,  But if you want to know where the door ...

...springs, if door opens up too much tension on springs. If door acts funny.like close when close to the floor and jump up when its futher more open, it means that you don't have the matching ...

door springs Weak check for a color on the end of the spring this will be the weight label. weigh the door with spring pressure off, hardware store will sell a matching set of springs. call a pro when

...door should then be closed in order to remove the panel. Step 2: Remove Springs To remove the springs, the hook of the spring should be lifted from the anchor point. Use your fingers to do so. If ...

...Pull the cord and unlock the door from the opener and try to push it up by hand. If it is hard to push then you know the spring is not working. if its an older door the springs could be on the