Questions & Answers for: Gb Electrical dash warning light

changing two light fittings changed light fittings switch on ok but when i switch them off they trip at fuse box NEED MORE INFO ABOUT YOUR LIGHT CHANGES

Wiring 4 lights with one swich I am installing 4 outside lights (100 watts ea.) at various locations on my garage controlled by one switch on a 15 amp dedicated circuit using 14/2 wire. My question is

after wiring the wall sitch the power comes on without the switch being on. I'm wiring pendant lights. the wires from each light are both black. There are may ways to wire a lighting circuit if you ...

am fitting new ceiling lights have 1 live 1 neutral 1 earth wire to connect . the ceiling connection has 2 live & 2 neutral wires as well as the connecting wires what do i do with spare wires do i

fueltank warning light staying on on dash 80 series l/cruiser fueltank warning light staying on on dash This is usually, a stuck, sensor, or a short circuit to earth in the wiring.

The socket next to my washer was used to put in an extension cord to fix my deck with a power saw. The socket is still out, but the breaker works for then lights there. Usually the washer circuit is a

how do i check a fuse Fuses can be checked visually but make provided a false "good" condition indication. A far more reliable method is with a continuity light or ohm meter. A simple continuity ...

My lights on my trailer wont work. How do I test the power that goes from my vehicle connector to the trailer. Hi, 1.connect the trailer connector to the vehicle connector. 2. Make sure your tester is

Help - 1 Way 2 gang switch - ie: two sets of lights in same room, 1 light switch with two switches on it, each switching on 1 set of lights. I have 2 brown wires, 3 blue wires, and a short length of ...

no power in cig lighter can not charge anything There is normally a 20Amp fuse that protects this unit. Check your fuse box for blown fuses. WARNING: If you remove power from the battery - then you ...