Questions & Answers for: damper rods

Question about 2003 Spectra

1 Answer

...under the dash on the passenger side, you will see a gold rod that controls what I would call the damper. If that has come out of the hole that turns the damper from heat to ac, judt put it back in ...

Ad

how do i remove the damper rod seat at the base of the stachion,does it tap out. to remove the damper rod you have to remove the allen bolt underneath the bottom of the fork leg. if you find this just

Ad

Question about 1987 GPz 1000 RX

2 Answers

...allen head bolt with a flat brass washer, washer needs to be replaced. Problem is the bolt and the Damper Tube are spining together the bolt wont let go. if you have removed spring , then should be ...

Question about 1987 GPz 1000 RX

3 Answers

...this? This is really annoying, happens with most Defenders, but is easily fixed. It is the steering damper. They are never strong enough. Best solution is to fit an additional damper onto the track ...

Question about 1987 GPz 1000 RX

1 Answer

need specs on damper rod holder part# YM-01454/90890--1454 Remove rod with air driven impact wrench. Use existing rod as jig to align fingers on 7/8 pipe. Weld and grind fingers to interlock with ...

Question about Advantium SCA2000B Microwave Oven

1 Answer

Advantium 220V damper door motor clicking My Advantium damper door motor clicks when the unit is not in use, it thinks the damper door is not closed all the way and continues to try to close the ...

...4 You need to provide a model number in order to look over the parts list and see what type of auto damper your model has. There are ways to test an auto damper to see if it opens and close properly. ...

Question about Advantium SCA2000B Microwave Oven

0 Answer

Diversion 900 damper rod removal? Hi, Robert for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a ...

rods under the tub tabs there is an air and piston type damper around the springs the top breaks out and the damper action is lost ( cost around $90.00 AUd for set of 4 check the tub level by removing

Question about Advantium SCA2000B Microwave Oven

1 Answer

...damper rods whole top screws need to be removed usually two at the top front and two at the rear, then lift one rod upwards so you can remove white or yellow tapered support cup the remove the rest ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...