...SABLE HAD TWO 3.0 ENGINES. ENGINE WITH CRANKSHAFT PULLEY FACING FRONT TOWARD RADIATOR AND GRILLE. CYLINDERS ON LEFT PASSENGER SIDE IS 1 2 3 CYLINDERS ON DRIVER SIDE THE RIGHT IS 4 5 6 GET PIECE OF ...
I have research around and found that the Bank 1 sensor 3 O2 sensor is post Cat. But when I got under there I dont see anything that could resemble a sensor. Where is it. Please help. Marc try this ...
4 cyl count from the front of the engine. The belt pulley is the front.On a 6 cylinder, one bank of cylinders is more forward that the other. On the forward bank the the front cylinder is number 1, so
...Cylinders are numbered 1-2-3-4, from front to rear. On a Chrysler v-6, number 2 is the first cylinder on the left side of engine. Cylinder numbering is 1-3-5 on the right side, front to back, and ...
Question about 2008 Accord
I took out the cylinder head for reconditioning after the car overheated ,then resetting valve timing is my problem now? setting the cam belt at number 1 cylinder at top dead center with valves ...
where is the #3 cyl. on the jeep penestar 2014 Cylinder number three is located on Bank one. Bank one is the right side (Passenger side). From the front the first cylinder (closest to the front) is ...
Question about 2008 Accord
...cylinders numbered #1, 2, 3, 4? And finally, is the firing order, starting from. The passenger side 1, 3, 4, 2? Thank you, Firing order is correct, (1, 3, 4, 2). Cylinders are numbered as 1, 2, 3, 4. ...
Question about 2008 Accord
...cylinders are numbered like this. Stand with the engine beltsand pulleys nearest to you. The RIGHT side of the engine is the ODD numbers and the LEFT side of the engine is the EVEN numbers. Number 1 ...
Question about 2008 Accord
What can cause low Compression on Cylinder number 1, and Cylinder number 2 on a 2000 toyota solara 2.2L? I did a dry Compression test on Cylinder number 1, the reading was 80PSI. Cylinder number 2, ...
Question about 2008 Accord
a system called a "Lost Spark Ignition". Basically each coil fires two spark plugs on two different cylinders at the same time every time. One firing for the ignition stroke and the during the exhaust
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions