Questions & Answers for: Mitsubishi Lancer control arms

...its really obnoxious. What could this be? I had the same problem. I had the control arms repaced in the back when my car was still under warranty. See if a mechanic can take a look at it to be

...into driveways There is four possibility's for this 1. bad struts, 2. Bad ball joints 3.Bad lower control arm bushings; and 4. Bad sway bar bushing. The control arm and sway bar bushing can be ...

...the way to throw heat or cold air out for you. gently undo the two screws underneath your heater controls ( 2 screws) after that pull that peice out (there are no clips so it should be easy) after ...

snapped wiper control arm I snapped my wiper control arm this morning. Is it easy to fix?? Hi there. the wiper control arm, if it is the outer one it can be easy to replace. Just remove the cap at the

...you have replaced parts till it is fixed. But the parts that could be the problem will be the lower control arm the knuckle and the sub frame. Those are in order from the most ...

need to replace driver side mirror On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will ...

...and the hoses. 3. Bent in at the bottom? Someone has hit a curb, HARD! You've bent the lower control arm and this has to be replaced. If this was just a control arm bush (these are replacable ...

lower arm pinch bolt torque setting please Hi Andrew,here's a link from Aytozone's repair guides on your lower control arm. SAVE 20 GET 10 GIFT CARD ON ONLINE SHIP TO HOME ORDERS OF 100 OR MORE

...the front of a 2008 Mitsubishi Lancer How do u replace the front lower control arms of a 2008 Mitsubishi Lancer. I can't get the bottom bolt off that connects to rotors get a longer pipe and try ...