Questions & Answers for: Volvo control arms

...bolt part? Your attention is appreciated [email protected] The balljoint is part of the lower control arm on this model year i believe. you will need whole lower

lower control arm how do you replace lower control arm on a 2001 volvol s80 non turbo pretty straight forward, you will need bar for refitting plus the 2 bolts are hard to access by engine I did mine ...

...control arms cracks My 2001 Volvo s80 has 97 K and the mechanic suggested he noticed cracks in the lower left/right lower control arms. The estimate is around $900. He advised me to watch for them. ...

...control arms rub on the inside of the Rims. Replaced balljoint and Control arms. Model V70 2.4 A SR try getting wheel shims to change the offset of the tire to hub. should not be more then 1/4". your ...

...control arms. I have went to many autoparts in my area, some of them said that it is not possible, however some said yes. I don't want to end with some bushings that don't fit, neither don't want to ...

torque specs for lower control arm 1999 Volvo V70 The ball joint lock nut spec is 37 ft.lbs (50N.m), the control arm to sub-frame bolt spec is 48ft.lbs (65N.m.) Hope this helps!

...Hi, 1989 240DL Orignal contol arm and ball joint parts. Shop says wornout. Does this mean the whole control arm or just the bushings. Can a backyard guy do the job without too much trouble and is it ...

...in the front of a '96 Volvo 850 GLT can you just replace the ball joints or do you have to replace control arm or strut??? It comes as one whole piece and i just searched around for a control arm ...

does ayone have the procedure to rplace lower controll arm on 2003 s60. looks simple enough just don't know bout any tension on front end I haven't had the pleasure to work on one of these yet

my front strut disloged from the a arm The struts on these cars do not connect directly to the control arm. The connect to the knuckle then to the control arm where it is attached by two bolts.Then ...