Questions & Answers for: Lexmark connect on line

...of two methods: 1. You obtain a DSL line filter suitable for connecting a standard voice telephone to the DSL line, then connect an analog fax modem to the line through the line filter. Good Luck, ...

...is no dial tone when I connect phone line from modem to printer so then it kicks me off the internet if I connect a phone line from printer to modem. hmmm..so, what type modem you working with

...do I do, please? -Try to connect line to a phone and check for a dial tone -make sure that line is connected to line port at the back of printer -try to use a spare cable if you have an extra ...

...connect with phone line... I can not send faxes. I can not get a dial tone on the handset either. If someone calls the house, i can pick up the handset and it stops the phone from ringing, but I can ...

...IT IS ON AUTO ANSWER Here are some things you can try, hopefully one will help. Check for a phone connection in the correct input jack. Some printers with fax capability have more than one phone ...

line. So please remove the dsl line from the fax and connect the phone line and you will see that the fax works. Connect the phone line connector from your fax to the phone port on the broadband modem

...or connect directly to line socket, to test. And test with any usual telefone to line socket, if all above is not working, try call to your telefone provider to report a telefone line

...and how to do if possible Hello. Unfortunately, the X5470 doesn't have the capability of getting connected wireless to a phone line. For faxing, it's still works like an ordinary fax machine where ...

Does the USB cable go into the LINE or the EXT connector for the X125 There is only one connector to hook the USB cable to on the back of the printer. You are probably confused with the telephone line

...connect due to an error. Most printers you go into your computer where your printer is listed, find the printer right click mouse or pad, and you may see a line that says off line, click on it and ...