26 but changed o2 sensor and purge selnoid allready pcm is good and code is hard and will not erase even for a second any ideas? The ECT (Engine Coolant Temp) sensor is most likely bad. Common problem
...code 26 it says quad driver module. What do we do to fix the problem? that code is your egr valve or your egr solenoid.sometimes you can remove valve and clean thoroughly with brake cleaner for a ...
...Code 12 will flash again. Diagnostic Codes 11. Transaxle Codes present 12. Diagnostic System Check 13. Oxygen sensor, circuit open or not ready 14. CTS circuit, out of range high 15. CTS circuit, out ...
...code 26 stalls at an idle when in d or r code 26 the car runs rough at an idle when in drive and reverse its possiable the computer has a bad quad driver, before throwing parts at it, take it to a ...
...code 26 and 27 quad driver have 95 saturn sl with code 26 and flag 27 quad driver module fault How do I know if its quad driver a or b at fault? Sometimes when I turn the key on the service engine ...
ses light on code 26 code 26 quad-driver module (computer) circuit #1 fault replace the computer.
code 26. I changed the EGR solenoid and the canister purge solenoid and I'm still getting a code 26. This only occurs when I'm on highway speeds of 64-70. The service engine light comes on and once my
trouble code 26 in the ECM What is the Quad control module http://www.differentracing.com/tech_articles/dtc/26.html This link provides a very good explanation and diagnostic process
...code 26 when engine gets up to operating engine cuts off and will not restart utill it cools off egr valve? you need to have this checked out by a mechanic this sounds like a manifold temperature ...
...4 Runner V6 exhibiting failure code 25/26 ? REAR OXYGEN SENSORS, MAKE SURE THE WIRES ARE NOT BROKEN OR THE BOLTS ON THE OXYGEN SENSOR FLANGE ARE NOT RUSTED OUT, AND ALL EXHAUST LEAKS ARE FIXED
Usually answered in minutes!
1,310 Questions
953 Questions
1,183 Questions
963 Questions
862 Questions