Questions & Answers for: Dodge Intrepid clanking noise

Question about 2000 Intrepid

2 Answers

noise when the AC is running and you accelerate you get a noise and if you take your foot off the accelerator the noise stops. i have added freon this month and it does cool but the noise is annoying,

Ad

Clapping noise coming from right side head. Assumed that I had a collasped lifter, replaced all lifters and rockers, still have noise. Noise is not a lower end i.e. rod bearing noise. The performance ...

Ad

Question about 1999 Intrepid

2 Answers

Loud whining noise I have replaced the Tensioner pulley but my 1999 intrepid makes a loud whining noise when running. It could be the A/C clutch or sepetine belt or something worse....any ideas? check

...clanking noise on 200 Intrepid There is a loud clicking/clanking noise coming from the engine of my 2000 Dodge Intrepid. 2,7 liter DOHC, are the rocker arms going out? Sounds like the motor is going ...

is there any wat to diagnose timming belt/chain failure on a 1999 intrepid put it into gear and SLOWLY push it backwards and forwards, if you can get a mate to help all the better. If you hear a 'bang

I have a 1999 Dodge Intrepid with 90,000 mile and it has a loud low pitch noise in the engine immediatelly off idle. It sounds like an idler pulley bearing, but I've checked the engine noise with the ...

...are bad Hi and welcome to FixYa! The sway bar may have a worn out bushings that's why it makes a clanking sound. There's a possibility that the shocks are still good. Have the bushings be replaced ...

Question about 1999 Intrepid

1 Answer

i have a 98 dodge intrepid 2.7L and i had a guy come over to help me replace the water pump and timing chain. after we took the timing chain off and replaced the water pump i noticed that he rotated ...

Question about 2004 Intrepid

1 Answer

2004 dodge intrepid front end noise grinding noise front end Without a description of the noise, this is impossible to diagnose. Common problem with these vehicles is a "grinding" type noise. This ...

just had a valve job done and it makes a noise when I go to start it Take it back to whoever did the work and let them find the problem. They should stand behind their work. if that does not work then

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...