...the oil pressure sending sensor;It can be? I use MOBIL 1 SYN OIL 10W-30 and a fram toughguard filter'"gracias"for any help. your sending unit can and will go bad id change it out before it gets ...
be removed and you will need a deep well socket and a 6 inch extension. Change the oil and the sending unit together. Where is the oil sensor located on a 2002 SSEI Bonneville and how do you change it
...oil pressure sending unit may be malfunctioning at this point. this will cause erratic readings. if your oil level is proper and there are no apparent oil leaks, you will need to replace the oil ...
...be carefull not to overtighten the oil pressure sending unit when use install it or you can strip the threads in the housing or damage the plastic wire harness connector housing on the sending
...on the engine. the car is a 2003 pontiac bonneville,3.8l v6,supercharged. The oil sending unit is on the oil filter adapter above the oil filter.You will need a special socket for the unit.Good
...the actual pressure and then you will be able to tell if it is just the sending unit/pressure sw , that is off. oil change in 2005 ponitac bonneville gxp now my computer is off balance do it set ...
oil presure reads 120 Bad sending unit or stuck pressure valve in the oil pump.
...oil, perhaps the sending unit is failing. If it reads fine be certain the filter is clean. If still nothing it is within the engine, you can try to use a heavier oil that may increase your oil ...
...be an oil sending unit? Yes. The only other thing it could be is the oil pick up screen is clogged. But if the oil has been changed like it should I wouldn't worry about that. Try a new sending
...changing oil pressure sender is less than 1/2 hour job- you can do it yourself -- very easy- do it at oil change- remove oil filter, right above filter, you will see wires go to it- you will need a ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
