Questions & Answers for: change serpentine belt 2004 olds

serpentine belt. lift the hood star the vehicle and turn a/c on have someone run the engine to 1500-2000 rpm you should be able to hear which one of these is the proble and have it replaced. hope this

...serpentine belt with an auto tensioner, this may not be the issue, although an old, stretched out belt could be the issue. If it's the original battery it may need changed or the altenator may be ...

...serpentine belt and now there is a humming noise I have a 2004 chevy traiblazer and the seroentine belt was changed and now the car is humming near one of the wheels that hold the belt If you've ...

change a serpentine belt on a 2001 Chevy malibu? First - note the routing decal on the underside of the hood. If there is no decal, draw a diagram before removing the old one. Move the tensioner using

...serpentine belt to squeal and drag making the engine sometimes stall. if it happens with the ac off and the selector on say the floor, or dash vents, the issue could be a bad alternator and battery. ...

change the serpentine belt? Serpentine belt isn't difficult to change. The diagram is on the support above the radiator. You'll need the proper size socket and ratchet to move the tensioner which will

...change engine oil, and the transmission oil. Inspect and replace if necessary, the spark plugs, spark plug wires, serpentine belt and belt tensioner. The ball joints and tie rod ends has to be ...

...serpentine belt How do I change the belt? You will see a roller on an arm.  This arm is called a tensioner.  There is a square hole for a breaker bar on this arm.  You will attach a ...

how to change serpentine belt 2008 mazda6 you need to lever the tensor and take old belt off then refit in same manor.

...serpentine belt tensioner first, it could be weak, I'd also look at the condition of the serpentine belt itself. If the belt has never been changed that means it's 12 years old and probably worn and ...