Questions & Answers for: Oreck change handle Vacuums

...handle it was full of stuff because the bag was blocked . I cleared it and now all is good. Change the belt. Oreck belts will stretch out so much that it is unable to spin the brushroller, but the ...

... I'm not sure what model I have (about 6 years old...upright, looks like the one in the picture). I changed the belt (which was torn) and then the next time I used it, it cut off on me. Now if won't ...

...powe cord connection and it was fine. I unplugged and replugged the electrical connections and even changed electrical outlets. The vacuum cleaner still does not turn on. Can you help? Thanks! Sandie ...

...fine, then when I vacuumed a shag rug is started smoking and smelled like something is burning. (I changed the bag, checked for clogs--none found, and roller brush is turning. It has a metal

...change the roller brush the bristles are worn anf this helps proppel the unit Oreck xl 79192 01 Replacement Brush Roller cwp brand or21 The key here is the angle of push. The closer the handle is to ...

my Oreck vacuum cleane won't turn on my Oreck vacuum cleaner won't turn on . It was working fine one day and the next I went to turn it on and it won't do anything. I checked the outlet and that isn't

the fan housing tube is cracked just below the bottom clamp. How to replace The fan housing is cracked below the clamp. The cracks goes almost all the way around the tube. How do you take it off to ...

...change your method of trying to push the vacuum. The more upright the handle is on an Oreck, the harder it will be to push. The lower the angle (the closer the handle is to the carpet) the easier it ...

...change the battery in an oreck magnesium vacuum cleaner At the back of the handle is the battery compartment, There is a simple turn knob to take the cap off to get to the battery. It takes a 2032 ...

...the handle opened up. If you use the bottom one you will only have high speed, so if you accidently get them reversed, all you need to do is change positions of the other upper wire. Hope this