Questions & Answers for: Hoover change handle Vacuums

change from on to off regardless of whether I have the lever on carpet or hard. Help! The adjustment knob on the hood of the machine is a plastic "arm" that prevents the belt tensioner from tightening

...change the belt(s) yearly.(on average) My machine wont go forward or reverse. The handle wont move up or down but just a little which slightly moves the actuator piece. The switch wont disengage to ...

...while you are vacuuming. To change the setting, you need to return the handle to the upright position and the adjust the setting and the machine will go to that position when the handle is

...change it...Help! Slide the plastic piece off the cloth bag and open the top. Looking down into the cloth bag, you will see the old bag. It is secured to the machine near the top. You will find the ...

Brush won't spin when position of handle changes When we release the handle and let it fall all the way back, the vacuum brush rotates as normal. When we lift the handle to the normal vacuuming ...

The handle seems to be loose and the self propelled function no longer seems to be functioning handle is suppose to be a little loose. s.p. function not working, try changing the flat belt p# 38528035

...However, I tried just replacing the handle first and it acted the same way you describe. Once I changed the PCB board it worked fine. Hope this

change the height until the handle is lowered so even though you change the dial when it is an upright position it is not until you lower the handle that the height is actually selected. Assuming that

handle is lowered the vacuum is raised from the floor. It may be time to change your roller. A quick search of part # 303202004 will bring several options for purchase. While your changing your roller

...Change on/off switch for model U5753-900 Hi! The on/off switch is located on the handle. To replace the switch, the handle would need to be replaced. Handle 39466088 can be purchased from an ...