Questions & Answers for: Chevrolet C1500 cap and rotor

Question about 1998 C1500

1 Answer

...cap, Rotor button, pick up module, ignition module and new plugs> Still will not crank and run! Listening to everyone say it had jumped time started trying to find TDC on num 1 and beyond what most ...

Ad

...cap and the rotor should be pointing to approximately the 5 o'clock position. Good Luck i tried to do this firing order with the rotor at 5 o'clock it didnt work it wouldnt start and just blew like ...

Ad

...cap and rotor on a 1985 chevy truck? and what model or brand distributor and rotor do i need? I have had good luck with Echlin caps and rotors that are from NAPA. You are going to need to mark your ...

Question about 1996 C1500

3 Answers

...cap and rotor. anything out of spec replace Check Crank Position sensor. It happens to be under the cap and rotor as well. If its broken, check the distributor for warp. A new dist. comes with a new ...

...WOULD BE TO CHANGE THE CAP AND ROTOR. WHAT WOULD YOU SUGGEST. I would at this point. The old plugs and wires would be a resistance holding voltage at the cap and rotor,, causing burning and

just unhook the cap and turn it so you can look inside. That's the easy thing to do. If the cap has the deposits you need a knew cap and rotor I would get knew wires and check your spark plugs as well

...is fairly simple) once at top dead center pull dist. cap and see if rotor points directly to spark plug wire # 1 on cap...If not loosen distributor and turn until rotor is pointing to #1 ...

...cap that the rotor is "pointing" to, use a ratchet on the center bolt of the crankshaft and turn the engine over by hand (clockwise direction only as viewed from the front of the engine looking ...

Question about 1992 C1500

1 Answer

...cap and rotor, but you still don't even get a spark, it's getting fuel... Please help me Tara Hi, Hope I can help you. I do not know how you have checked for spark, but lets start from the beginning. ...

Question about 1992 C1500

1 Answer

...cap and rotor and replace. Just fixed one last week. Rotor was causing a misfire under load and coil contact to rotor was worn out down too the cap. Graphite dust from the center contact in cap was ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...