Question about LS-1217 Mechanical Sewing Machine
...Bought new. Used very little just for hemming. With the bobbin and retaining ring off, I notice a burr on the part that rotates back and forth. Could this be the problem? Can I replace this? From ...
Question about CS-8150 Computerized Sewing Machine
...help. If I set the foot not to ruffle, it will sew fine. Take the foot off and check for a small burr in the area that pushes the material through. If there is a burr, it will get caught, ...
Question about CS-8150 Computerized Sewing Machine
my machine keeps bunching underneath why totally rethread your machine, your top threading is wrong or thread is tangled. Sometimes the needle is bent or has a burr, use a new needle.
...try it with the foot control. If it hangs up as it goes around the bobbin case, you might have a burr on the black plastic bobbin case. Take it out, check for any burrs, sand them down, and try ...
Question about VX1435 Mechanical Sewing Machine
...machine begins to sew, the top thread cuts and won't sew! change the needle it could have a burr or be damagedalso check the needle plate & bobbin area for ...
Needle come unthreaded sewing alone and needle comes unthreaded? try changing the needle--it's possible that something is wrong with the tip of the needle check on the needle plate for burrs--if you ...
loower looper keeps braking. i got my brand new serger almost 2 years ago and i havent really had a good connection with it. i have done, tried changing needles and threading it right but it still ...
removal of bobbin burrs I've noticed scratches on the bobbin basket. How to remove them? you can use a very small file and very very gently rubb till the burr is removed or very fine sand paper ...
...adjusting the tension and nothing seems to work could be a dull or bent needle. Could also be a burr on your hook. Try changing the needle first. If it's a burr on the hook or the needle plate, ...
...Also, how old is your thread? Many times, old thread will break easily. Check your needles for burrs. If there is a burr, the thread will break constantly when the needle moves up and down as it ...
Usually answered in minutes!
3 Questions
2 Questions