Questions & Answers for: Panasonic bent door

...bent or twisted, even slightly. There is a reason that the door has a spot marked "push door shut here". Pushing it anywhere else will usually bend something. It may be working now but who knows. ...

...door hard to close and the switches would not work right . The microwave would time out after 3 seconds. I removed the cover with a star bit and a Phillips screwdriver. I bent the switches back ...

door, remove the toner cart. Look in the cavity towards the bottom left side You should see 2 spring loaded loops sticking up. One or both of them is probably bent down and not making contact with the

Close Front Panel U1 Error Check actuator on door to make sure it's not bent or missing. Actuator tab should engage with photo sensor to tell machine door is closed.

...cassette door, there is a metal piece in the back that pushes the tape ajainst the head. If that is broken or bent, you can get low audio. Other possibilities are a dirty tape head or misaligned

...door.If it is bent the switch will not make contact with the door hooks. Place a dab of lithium grease on the tip of the door hooks to ease closing the door. This is the cause of the bent switch ...

...a small dab of lithium grease to the tips of the door hooks. You might also have to adt. the door latch switch assembly inside the oven as it could be bent out of shape from the hard to close

There is also a micro switch lever that if bent or out of place might prevent the catch going in far enough. Or something in the door or the anchor have come loose so that it does not completely close

...door may have a leak, ie bent or worn. Warmer moist air entering the colder atmosphere of the freezer condenses then freezes the mist into ice particles. If your freezer has a door-lock, try locking ...

Need the meaning of a USB error message E1 for a panasonic cq rx660u usually means the cd frawer or door is stuck open or not closed correctly also check for a bent pin in the usb socket and dust