Questions & Answers for: Makita should my battery charger be flashing

Question about 12 Volt Cordless Drill/Driver Kit

2 Answers

...charger or battery is to hot and must cool down before it will charge. The charger will not charge a battery if the lights are flashing. Solid Red light means it is charging and solid green light ...

Ad

Question about 2 Bl1830 18v Battery,dc18ra Charger Lxt Fr Drill

1 Answer

...my makita 18v li-ion fast charger unplug charger to let it reset. plug back in and then try again, if it still flashes red/green that would indicate a battery failure. check for warranty

Ad

Question about 2 Bl1830 18v Battery,dc18ra Charger Lxt Fr Drill

1 Answer

...battery on your charger and both red and green lights flash it is indicating that battery is defective. There may be a short in the battery or they just may be too old and worn out to charge anymore. ...

Question about 2 Bl1830 18v Battery,dc18ra Charger Lxt Fr Drill

1 Answer

on to charge, the battery is no longer chargeable. Most likely it's bad cells inside the battery, the charger is reading the battery as bad and will not charge it. The only fix is to buy a new battery

Question about 2 Bl1830 18v Battery,dc18ra Charger Lxt Fr Drill

1 Answer

...charger I get an alternating red and green flashing light and the battery will not charge. Bother batteries were fine and showed no sign of degradation. Are they shot? Is this common? Batteries ...

Question about 2 Bl1830 18v Battery,dc18ra Charger Lxt Fr Drill

1 Answer

battery or charger, you just have to find out which is bad and replace that one.  It's almost always the battery but sometimes chargers do go bad.  The only way to test them is

...battery charger flashes red and green lights no matter how many bateries i try The pcb inside the battery has a microcontroller that monitor the charges and charge cycle. When the cell falls below a ...

Question about DC18RAX230 230-Volt LXT Lithium-Ion Charger for 7.2 to 18-Volt Batteries

1 Answer

...battery charger wont charge put battery in charge fan comes on then after 20 seconds fan stops and both green and red lights flash If both lights on the charger are flashing it is indicating you have ...

Question about Cc300dz 10.8V Li-Ion Cordless Tile Saw/ Glass Cutter

1 Answer

...charger or battery is to hot and must cool down before it will charge. The charger will not charge a battery if the lights are flashing. Solid Red light means it is charging and solid green light ...

Question about Cc300dz 10.8V Li-Ion Cordless Tile Saw/ Glass Cutter

1 Answer

...battery charger is flashing red with a battery plugged in, what does this mean? On the Makita 18-V DC18RA charger, the flashing red light means that the battery is not at the correct temperature for ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Makita Drill Experts

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66980 Answers

Are you a Makita Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...