Questions & Answers for: back flushing heater core 2002

...and possibly radiator...run some flush product through and replace coolant...not always possible to completely flush out heater core without pulling heater core lines loose and flushing them ...

...no heat, line going into heater core is hot line coming out is cold Sounds like the heater core is plugged up. You could try disconnecting the hoses and flushing it out backwards with a garden

2002 chrysler Town And Country heater not blowning hot air. only blowns warm if that. Where is the location of the heater water valve. Is there anything esle that I can check. Thanks the cheapest way ...

heater does not work well have you had your heater core flushed?and is your temp gauge reading normal or is the operating temp lower than usual?

When heater is turned on it does not blow out hot air. Please help? 3.3L . When heater is turned on, it does not blow out hot air try chaging ur thermoustat or flush ur heater core

...of being blocked . Have someone back flush the cooling system with a chemical flushing additive. If this gets you some heat, but not as good as it should be, replace the heater core. Hope this

heater core. You may be able to flush your coolant system using a garden hose and compressed air from an air compressor( if available). Doing this may dislodge any deposits that have built up overtime

...heater core located on a 2002 town and country minivan? There is a great deal of antifreeze leaking from what seems to be a heater core located just in front of the rear passenger tire. 1) How do I ...

...to the heater core they should both be hot if not could be heater core needs to be back flushed. if its the blower they have a resister next to the blower they start on 2 or 3speed than they just ...

...Heater Core? I just did mine in a 1995 Town car, took 7 hrs with union breaks (lol) You have to take the instrument panel away from the firewall, once that is done it takes 10 minutes to change the ...