Questions & Answers for: adjust tension timing belt 2004

...belt that keep stretching and wouldn't maintain proper tension, putting brake fluid or any kind of oily liquid on your belt will make it worst not better. I also have a 98 Frontier 2.4 litre with the ...

Ad

Question about 2002 Frontier Crew Cab

1 Answer

...Frontier. I have a belt squealing. Is the lockdown nut/bolt for each adjustment located in the center of the actual pulley wheel ? If true, then I would loosen this first and then tighten/loosen via ...

Ad

...frontier 4 cylinder belt diagram + tensioner pulley I want to replace my serpentine belt and tensioner pulley on Nissan 2006 frontier 4 cylinder and need a belt diagram that shows where the tensioner ...

Question about Motor 2004 Sonata

1 Answer

...until the teeth are approximately 1 / 2 of the way across the head of the tensioner adjusting bolt. Re-tension the belt, if necessary. Install the timing belt covers and all other related

Question about 2004 Galant

1 Answer

Timing belt tensioner adjuster rod set hole ?A? and cylinder set hole ?B??2004?2005 Galant and 2004?2005 Lancer 2.4L engine To install: Belt tension checking?2004?2005 Galant and 2004?2005 Lancer 2.4L

...Adjust the belt tension to specification by turning the adjusting bolt clockwise or counterclockwise. Air conditioning belt tension should be 0.28-0.039 inch. Alternator belt tension should be ...

Question about 2003 Frontier Crew Cab

1 Answer

Belt is loose or worn out. If it is a serpentine belt the belt is worn out or the tensioner is defective. If it is a Drive Belt just adjust the tension or replace the belt if it appears to be worn out

...Timing belt have 2000 frontier 70000 miles driving down highway everything just fine then engine stalled and never started found out the tensioner for the timing chain stuck causing engine to jump ...

...timing belt tension mechanism or timing belt, the vehicle on board computer or another cause for this. A loose timing belt would cause this and a bad tension mechanism would cause it both would give ...

if it has an automatic belt tensioner(one that adjust tension all the time)like a serpintine belt then the tensioner may need to be replaced as the spring that crates the tension do get weak over time

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...