Questions & Answers for: 650 idle screw

650 rpm idle start adjusting mixture screw until max rpm obtained. back out a bit too be lean. Ajust Idle screw again for 650. Turn on appliances as lighting and airco. If engine starts/tends to stall

...idle on my 1981 XJ 650 Maxim. Every time I come to a stop in first gear the engine races. At first I thought it was the choke. I don't know anything about motorcycle repair so a diagram would be ...

...650 will not stay running and when it does for a few min its on choke. Already cleaned the jets, carbs. Checked spark plug replaced. I wonder if its not getting fuel. have you tried setting the idle ...

carbs I need the air screw settings for my 650 roadster Screw it in until it gently seats. Now back it out one and one half turns. Do the same thing for the idle screw.

650 running lean at higher speeds, (off idle) Bike idles fine but above idle on cruise it surges, if pull choke out a little it will run fine at road speed but choke out at idle. Carb has been checked

i do not no how many turns out on the air screw on my 1993 suzuki 650 dr turn it all the way down, then one screw up, start the bike and turn up the screw, or back until you get the best idle

idle. 1999 vstar 650, 9500 mi., has no power (wont go over 55 mph), stalls out at idle. Changed fuel filter and spark plugs. Still no good. have you checked the carb for dirt ? sounds like the carb is

...day. 2005 yamaha star silverado 650 idle screw location Google Search How to clean yamaha star 650 carburetor 1 of 6 Yamaha XVS650 Service Manual OEM parts for Yamaha YAMAHA XVS650 Owner ...

...650 Hi, Hachem it should be noted that the "AIR FUEL" mixture screw adjustment "ONLY" manages your idle and has no effect on any other circuit also any intake leaks must be repaired before the A/F ...

...idle on my Burgman 650? Remove one screw and pull off the hump cover. The idle adjustment screw is up high, on the left side as you look forward. A standard philips screwdriver fits it. With the ...