Questions & Answers for: trailblazer intake removal

Trailblazer 4.2L L6? And how do I clean? The throttle body is the box connected to the intake manifold. It is connects the air intake system to manifold. You will see your throttle cables connected to

...Trailblazer and need to know how to go about replaceing the valve cover gasket.The engine is the inline 6. intake must be removed on these 4.2L I6 to access the RH side valve cover bolts. Hopefully ...

...trailblazer i cant find them 4.2 vortecs have individual coil packs located onthe vert top of the engine you have to remove the plastic intake thats sitson topand each individual coil pack to get at ...

need location of sparkplugs on a 2004 Trailblazer UNDER THE AIR INTAKE TUBE WHICH GOES OVER THE VALVE COVER REMOVE THAT AND THEY ARE UNDER THE COIL PAKS look under the top plate

...trailblazer The Intake Air Temperature Sensor (IAT) is located in the intake duct near the air cleaner assembly on the right side of the engine compartment. To replace it, you would simply disconnect ...

how to remove intake on 2002 Chevrolet trailblazer 4.2 Do I have to remove the intake bolts to remove intake 4.2 Chevrolet no...just use a torch and blow the heads off.

...trailblazer how does it come out First of all u need to disconnect the negative bat. It simply to remove starter by using extension tools with universal wrench... Or remove it going up side of the ...

throttle body cleaning Tbi cleaning alone won't fix it. The entire intake (big black plastic intake manifold) needs to be removed and cleaned. Also clean any soot on the head intake runners. And ...

how do i remove the intake manifold on a 05 trailblazer in line 6 without going into detail buy a Haynes manual and it will show you

...Trailblazer 4.2 I have no idea how it's getting there it's brownish with oily substance That could mean your PCV valve/system has a problem and isn't removing excess pressure from your crankcase. ...