Questions & Answers for: Whirlpool 20a fuse

...20A fuse inside the curcuit board, but it still won't turn on anything other than the clock. Any ideas? This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs ...

...fuse (250v 20a), but this does not seem to be the problem. Any suggestions? Thanks! Does the display light up? Are you sure it is getting power? Check that and get back to us cause the next step is ...

20A 250V Ceramic Fuse from unit, no continuity when tested. Replaced Fuse, plugged in, and the breaker tripped. tried to reset breaker but it trips again instantly with the microwave plugged in. There

...20A Fuse in Control Panel of Microwave, but now the 20A Breaker @ the panel pops almost every use. Any ideas on what needs to be fixed to correct this problem? There is absolutely no way to guess at ...

...20A ceramic fuse, an oven cavity thermostat, and a magnetron thermal fuse, any one of which may interrupt power. Which one may have blown depends on how it failed. There should be a "mini-manual" ...

...20A fuse and two or three cavity thermostats. There should be a "mini-manual" (tech sheet) hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very ...

20A fuse, two 4A fuses, and two or three oven cavity thermostats, any of which can render the oven dead. There should be a "mini-manual" (tech sheet) hidden inside the unit behind the control panel or

fuse or thermostat.This model has three fuses, a 20A, a 4A, and a .25A and three cavity thermostats.There should be a "mini-manual" (tech sheet) hidden inside the unit behind the control panel or

...20A fuse which is behind the control panel. The power came back, I could set the clock but as soon as I started it, immediately the fuse blow out. What could be the issue? Thanks. The problem is in ...

fuse is 30A/250 an couldn't find one so I tried 20A/50 not nothing no light nothing You will definitely need the correct fuse. Get someone competent with a meter to test the circuits. Test the