ignition switch to the RUN position. Allow the self-positioning of the actuator. Turn the ignition switch to the OFF position. Remove the actuator from the electrical connection. Blend door actuator-C
2001 mb clk 320, my ignition switch will not turn. screen tells me to remove key, but tires wont lock when key is removed(steering columb wont lock). Hi there I had something similar on my merc but ...
...2001 Expedition...anyone have any ideas? I was certain it was the brake light switch since that controls the brake interlock on the expedition but i am clearly missing something. Shift Interlock ...
...ignition and headlamps on warning chime does not sound when driver's door is opened The door switch is faulty or the wire leads are damaged. Try manually depressing the switch rapidly to see if the ...
2001 F-150 cruise control stopped working. Already checked the fuse and it's good. What's next really tough to do on the net but first we need to know about any codes... Hold speed control OFF button,
...2001 MAzda MPV- Key was stuck in ignition. Would not turn all the way back to remove. I pulled the fuse for the Hazards and WHOLA!! Key turned back and could be removed.! Just to test the problem I ...
...ignition switch with You or want to remove it first to make sure you are buying the correct one, follow these steps to remove and install it. Set the ignition key to the off position. Detach the ...
Question about 2001 Dodge Ram 1500 Truck 4WD Front Steering Kit
...2001 Dodge 1500 4WD, no power to engine component, have power to alt, starter, ingnition, will turn over no start... Could be your ignition actuator pin in the ignition switch. $30.00 replacement, 20 ...
Question about 2001 Continental
...2001 I would say it has something to do with this ! Shift Interlock System An ignition/shifter interlock mechanism is installed to prevent shifting the transaxle out of the PARK position unless the ...
...2001 Ford F250 key won't come out of ignition and won't go into auxiliary either. It starts fine. What is causing this. Take ignition cylinder out and it works fine, put it back in, still won't come ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions