Questions & Answers for: 1994 nissan maxima timing belt

Question about 1994 Maxima

2 Answers

...belt). I did replace one in my 2000 maxima. It looked hard to get to and paid mechanic the first time ($350). It went out again because he but some wires against the transmission and they melted and ...

Ad

Question about 1999 Maxima

2 Answers

...nissan maxima Maximas had a timig belt until 1994. Some Maximas from 1992-1994 had chains also, but only the VE30DE models. All VG30 models had timing belt. Since 1995 all maximas (A32, A33, A34 the ...

Ad

Question about 1994 Maxima

2 Answers

1994 nissan maxima that will not start. the anti theft light is on and when i go to start the engine it will not say nothing, but all the lights, radio, and horn and stuff will work. we had everything

...Nissan Maxima- runs rough, stalls when idle it sounds rough and runs rough. It just started to stall when idling. Timing belt could have skipped a tooth. Horrible vacuum leak could have started. ...

Question about 2000 Maxima

1 Answer

...1994 Nissan Maxima I just had a full tune up and it is still running ruff. The people who did the tune-up checked the fuel injectors and cylinders 1 and three were not receiving any pulse from ...

...nissan maxima 2003 Your owners manual will tell you, usually it's between 40000 and 60000 miles. Never - you only change BELTS - maxima's haven't used timing belts since 1994. PS - Don't confuse ...

...timing belt is located Front side of motor behind waterpump. Under the timing chain cover. Passenger side of the vehicle at the front of the block. It goes from the very bottom of the engine all the ...

Question about 1994 Maxima

2 Answers

...1994 nissan maxima is back fireing my dad think it has to do with the timing on it Very much so. They have a belt on the timing and it can slip, loose a couple of teeth or break. You have a no ...

...1994 Nissan Maxima is not spinning when the engine is cranked, thus the car is not starting. What could cause the distributor to stop spinning? The engine died out suddenly when the car was in motion ...

1994 Nissan Maxima timing belt intact. Distributor rotor not spinning. What could be the cause? Use no. 27 ring spanner to check if your pulley on the crank drives. Suspect your right cam shaft is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...