Questions & Answers for: 1990 jeep wrangler yj 2

...there a tensioner pulley really doesn't make sense 4.0L straight 6 (91 jeep wrangler YJ) you need to loosen the alternator bolts then turn the bolt under the alternator to relieve tension on the ...

Ad

Question about 1990 Wrangler

1 Answer

...1990 jeep wrangler s can't find a serial number and everything i have searched on the internet talks about a yj, tj, etc not an s model but the jeep dealer ran the vin # and said it was a (s) model? ...

Ad

1990 Jeep YJ 6 cyc. Won't Start---No Spark From Coil 1990 6 cyc., 4 spd, carburated. Jeep won't start. Getting no ignition spark from plugs, distributer, or coil. Replaced coil and checked all fuses. ...

1990 YJ jeep. Need Diagram I recently bought a 1990 Jeep YJ Wrangler w/ 4.2L 6 cyl, 5spd. The factory throttle linkages are missing. Need diagram and where to buy new ones. Go to any scrapyard and you

...1990 jeep YJ replaced the alternator and now there is a loud screeching noise replaced the belt,replaced new bearing in idler pulley still makes a loud screeching noise? If the belt is not tense ...

...1990 jeep yj wrangler How do you adjust the caster, camber, and toe on a 1990 jeep yj wrangler ? caster is adjusted at the rear of the lower control arms. Camber is fixed and cannot be adjusted by ...

...1990 yj with the 4.2 my question for everyone is What transmission do i need ? bought this jeep as a project with no tranny Most 90 wranglers from 89 to 95 have an ax15 5 speed transmission in them. ...

...1990 Jeep Wrangler? inside the windshield frame, the wiper arm linkage splines onto a rotating arm on the wiper motor. The nut came off the wiper motor on my '93 YJ where the short arm (about 2") ...

Question about 1990 Wrangler

1 Answer

1990 Jeep YJ with no spark im having spark issues with my jeep. i changed the ignition coil and it started up right away. 2 days later, it turns over but no ignition. i ran a test light to the coil, i

1990 Jeep Wrangler YJ. Got the motor running now. I had a frayed serp. belt. I replaced it and am pretty sure all is correct. I made two short test runs and both times, the belt has ridden up the back

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...