Multicast Streaming is not passing through Firewall.

http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/pppoe.html

You can not do content filtering with ASA firewalls with IOS. You will need to buy a content filtering solution, or sign up for a inexpensive content filtering with OpenDNS.org. This is a good content filtering basic system with white and black listing capability.

Good luck!

hi,
when u login in ASDM you can find on right side services and u create one whre u add which all ports u want to and apply that in ur rules

mode exec user Router)
ping ip
show ip route
show version
traceroute ip

mode exec priveligiado
show arp
show interface
show protcols
show ip protocols
show startup-config
erase startup-config
reload

You may refer to the steps in the link below:

http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/trouble.html#wp1049302

I hope this helps!

Doing my best to give you a correct solution and understanding
Issue : delays in streaming video
Environment :
ISP : Bellsouth
Router : wireless WRT150N
Solution :
"Downside to streaming"
Traffic jams.
Internet isn't a direct pipeline from the source to you. Streamed content passes through many other computers on its way to your computer via your ISP. If any one of them is carrying too much other traffic, the streamed content may be interrupted and pause. Streamed content is "buffered" to help avoid this, but sometimes it's unavoidable.
(test the downstream and upstream speed and alose test the download )
(Checked deleting the temporary files and folders)
(Checked firewall and Anti virus)
A slow computer :
if you have too many applications open, it could slow down your media streaming. If you notice things are sluggish, close all unnecessary applications and windows running on your computer. Just keep your Web browser and your media player open.
Noisy phone lines.
phone line that isn't free of noise (humming, crackling), that's not good for streaming (or Web browsing). Disconnect any phones that cause a buzz or hum.

If you are going for factory reset use the following commands

asa>enable
asa#write erase
asa#reload

Dont save the configuration when it prompts for it.

if you want to restore the configuration from the backup

1. You need to have a TFTP server
2. Locate the config file on your TFTP server
3. TFTP server should be reachable from ASA

then

asa#copy tftp flash

give the tftp server ip address
give the configuration file name (as exactly on the TFTP server)

reload

Hi,

The crossover cable should work fine for sure.

Best Regards,
TL

Voila un link pour un bon simulateur:
http://networksims.com/pix.html

I had this same issue on my ASA 5520.

1. Copy the config and IOS image to a tftp server.
2. Format flash (disk0)
3. set rommon server, ip addy, and file settings.
4. tftpdnld
5. Once the system has booted to the image copy the asa image file, asdm image file, and config to flash
6. configure asdm image default location and reload