I have a Timex Ironman T563719J. The digital clock is working, but the analog portion has stopped. Any ideas?

Hello Norma,

As a matter of...

INTERNATIONAL time standard indicates the time always
changes BETWEEN 1 & 2 am...

General CLOCK-WORK standards HIGHLY recommend
MECHANICAL timers, clocks chronometers & chronographs
always ONLY be advanced... (or stopped)...!!

NEVER ever TURNED BACKWARDS

Carnac the Magnificent

on the upper right button, the start/stop button, you had to press and hold it to off. i hope i had help you.

Hi, You may know that this watch runs on two batteries, one for digital display and another for analog hands.
If the analog hands stop working all you need to do is to replace the battery and please replace both at the same time since the band and cover take some effort to remove.
You need to take off the both bands first to access the back side than the back cover with a small knife..
Just in case,if you need the user manual here is the link.
Timex watch: http://www.timex.com/info/Product_Instruction_Guides_Downloads .
Take care..
Regards

Make, model, all numbers, please.

I think you mean that the hands do not indicate the same time as the digital display. If this is the case,then the hands can be adjusted.

You can get instructions on how to do this from the Timex web site "timex.com".

At the bottom of the screen click on "manuals/downloads", then on "product
manual download"

Enter your watch type in the search box and click on "search"

It could have 2 batteries! 1.5 volt for analog and lithium for digital! Take it to a reputable watch repair business and let them check! :-)

Good luck!

Press Mode till you are in Alarm setting
Press and hold split/start button till you hear the double beep. You should also see a small clock icon above the last digit of the seconds... you are all set. Repeat to deactivate hourly chime.

Yes. Timex uses a CR or lithium battery and they are notorious for not having enough power toward the end of their life to run the analog side of the watch.

find the manual at manualfox.com
Just send them a request. It will include a hint for the body case.