F12 code - Whirlpool Duet GHW9150P Front Load Washer

Protherm Lynx Combi F12 Error - Low Voltage Fault.
Jun 22, 2016

Combi Fault Codes - Installation - Tesisat.org

..

Keyword Ranking Analysis for ARISTON OVEN FAULT ...

www.webstatschecker.net/stats/keyword/ariston_oven_fault_code_f12
Keyword Ranking Analysis for ARISTON OVEN FAULT CODE F12 ... fixya.com.Ariston Technologies Ariston AWD120WH - "F12 error code" issues

https://bugtingpreltab.files.wordpress.com/2015/10/bell-f12-bike-computer-manual.pdf

If you need further help, reach me via phone at https://www.6ya.com/expert/cynthia_0eebb7da17b33b5e

F12 SPECIFIC FOR LVB2000 INDESIT EVOLUTION / DIALOGIC.
F12: Lack of Display card-Main Card Communication
1. Check the effectiveness of contacts on CNC Connector Card
2. Overhaul 8-way connector on Display card
3. Check continuity of CNC-CN 8 way connector
4. Replace Main Card
5. Replace Display Card

Dado

Also here is a list of He2 error codes http://www.applianceblog.com/mainforums/sears-kenmore/10283-he2-error-codes.html
I think the error code you are actually getting maybe an F21 due to there is no listing for F12. use this kink to put the unit into diagnostics and run the diagnostic menu which will give you your exact error code as well. I await your reply
Thank you
Rick

Hi

The code F12 means the following:

F12 - No mixed fill. It is likely that the water is not turned on at the taps.

Also Error code F12 is indicating a communications error between cards; Error code F12 is indicating a communications error between cards, this can be caused by one of several things. A problem with bad connections, if you can remove and then replace the plug on connectors, check for loose or chafed wires to motor, they can chafe due to tightness of wires, particularly down to the motor.
It is an electrical problem as opposed to a mechanical one.

Please get back to us if you have further query else please accept the suggestion.

Thank you for contacting fixya.com

The code F12 means the following:

F12 - No mixed fill. It is likely that the water is not turned on at the taps.

here is a link to all hotpoint error codes:

http://www.hotpointservice.co.uk/hs/pages/content.do?keys=FAQ:ERROR_CODES

If this helps please rate me

F12 means no communicastion between boards.
Check all connections and wiring between the boards.
Good luck

Is this a model 110.47512601 HE2 Plus? If it is, I do not see an F12 error code listed. I have a tech sheet for an HE2 Plus, but I only see an F21 error code.

There is a tech sheet inside your washer that explains all the error codes. You will have to remove the lower panel under the door to access it. Its usually mounted to the inside of the lower panel on along the interior walls of the cabinet. There will be instructions on how to enter diagnostics mode and a full list of error codes, followed by procedures to follow on how to correct. If you require further assistance in determining the source of the error, please let me know.

PS Don't tell Sears I told you where they keep their "secret" error code list. Don't you find that irritating? The repairman would have come to your home, opened the washer, and read the tech sheet right in front of you - then charged you for it. Good luck.

what is F12 error code on a siemans wxlp1400 and how do i cure the fault, cheers