How do I set my woods digital outdoor timer model N1506, Is there an instruction manual for it. Thanks Keith [email protected]

N1506 is 2-button timer.
N1502 is 1-button timer

Copy following link to identify both timers and download possible manual
http://waterheatertimer.org/Woods-timers-and-manuals.html#N1502

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Open following link to identify timer with manual:
http://waterheatertimer.org/Woods-timers-and-manuals.html#N1506

Manual for Intermatic/Noma 1506
http://waterheatertimer.org/pdf/Woods-49122-N1506-manual.pdf

Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, expert speaks with you over phone while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

You can get the manual on the link below.

http://waterheatertimer.org/pdf/Woods-49122-N1506-manual.pdf

This should help....
http://waterheatertimer.org/pdf/Woods-49103-N1502-manual.pdf
Take care....

You can get the manual on the link below.

http://waterheatertimer.org/pdf/Woods-49122-N1506-manual.pdf

Good Luck

N1505 timer manual:
http://waterheatertimer.org/pdf/Woods-49122-N1506-manual.pdf

N1506 is heavy duty outdoor timer with display screen.
Plug timer in and display flashes C.
Set current time: press Time button once and display shows 1 am
Keep pressing time button until current time with am pm displays.
Dot in lower right corner corresponds to pm hours.

To set timer program:
Press Mode button, display flashes P
Press Time button until desired ON time displays.
Press Mode button again and display flashes E
Press Time button until desired OFF time displays
When programming is finished, press Mode button and display shows current time.

To reset timer, unplug timer for 10 seconds and re-program timer.
Timer must be reset after power outage. Display will warn by flashing C.

Plug lights into timer.
If lights have a switch, switch must be on.
For manual override, press Mode button, and display shows O and lights will be ON until next program change.
To use timer function, press Mode button until current hour displays.

Woods 49122/N1506 manual.
Your description sounds similar to timer shown in manual.
http://waterheatertimer.org/pdf/Woods-49122-N1506-manual.pdf

If this is not your timer:
Woods makes a lot of timers with more than 1 number depending on who packages and sells timer.
Here's a link to Woods timers that might help you identify:
http://waterheatertimer.org/Woods-timers-and-manuals.html

Woods timers and manuals:
http://waterheatertimer.org/Woods-timers-and-manuals.html

N1502 manual:
http://waterheatertimer.org/pdf/Woods-49103-N1502-manual.pdf

N1506 manual:
http://waterheatertimer.org/pdf/Woods-49122-N1506-manual.pdf
N1506 written instructions
http://www.fixya.com/support/t6964404-set

Woods timers and manuals:
http://waterheatertimer.org/Woods-timers-and-manuals.html

N1506 manual:
http://waterheatertimer.org/pdf/Woods-49122-N1506-manual.pdf

Woods timers and manuals:
http://waterheatertimer.org/Woods-timers-and-manuals.html

N1502 manual:
http://waterheatertimer.org/pdf/Woods-49103-N1502-manual.pdf

N1506 manual:
http://waterheatertimer.org/pdf/Woods-49122-N1506-manual.pdf
N1506 written instructions
http://www.fixya.com/support/t6964404-set