Have a Troy-Bilt Chipper/Vac model # 47282 5hp sp, the Carburator needs to be replaced, I cannot find a part # for it, or where one can be purchased, please help

If it's the same as for my 47287 (8HP, 3 spd + reverse), it's part No. 1901996 and is NLA. Let me know if you find a source, mine is also broken.

Call Fred at 651-786-4277 I have used bags and some new bags. I also refurbish chipper vac bags

Hi and welcome to FixYa. I am Kelly.

Go to this site:

http://www.brentchalmers.com/

I note your looking for the Super Tomahawk. If you can come up with a model number I think I can find your parts manual for sure. (or at least an on-line parts list.) Also.... If you can come up with an engine number like OH120 or L90 off of the engine I can find you a manual for the engine also.

This is the list of Manuals available there:

1983 W-W Grinder Inc. Manual and Parts List Super Tomahawk 5-8-2G/C and Tomahawk 5-8-2G/M Chipper/Shredder (40 Pages)

1989 Troy-Bilt Owner/Operator Manual Junior Tomahawk Chipper/Shredder (24 Pages)

1989 Troy-Bilt Technical Manual 4HP, 5HP, & 8HP Models Tomahawk Chipper/Shredder (12 Pages)

1991 Troy-Bilt Owner/Operator Manual Junior Tomahawk Chipper/Shredder (24 Pages)

1991 Troy-Bilt Knife Kit number 1772231 (1 Page)

1992 Troy-Bilt 5HP Model Service Kit (Part Nos. 1901153 and 1901804) For Chipper/Vac (1 Page)

1992 Troy-Bilt Owner/Operator Manual 47260, 47261, 47271, 47272 Chipper/Vac (60 Pages)

1993 Troy-Bilt Sales Brochure Chipper/Vac (4 Pages)

1993 Troy-Bilt Owner/Operator Manual 47265, 47266, 47267, 47276 Tomahawk Chipper/Shredder (44 Pages)

1993 Troy-Bilt Parts Catalog 47265, 47266, 47267, 47276 Tomahawk Chipper/Shredder (16 Pages)

1994 Troy-Bilt PTO Chipper/Shredder Owners Dog Clutch Kit 1902404 (1 Page)

Hopefully your model is one of the above.

Here is link to the Parts manuals:

http://www.partsandservice.com/html/TroyBilt/cs/

There are 90 parts manuals there.

Again with a good model and engine number I can probably come up with your exact manuals.

Thanks for chosing FixYa,

Kelly

i have a chipper too, and it started giving lot of problems 4 yrs ago, so I got this manual from reliable-store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the 20 times I fixed the chipper in these 4 years

parts are NLA Murray has gone bankrupt, assumed by Briggs & Stratton. Many Murray parts are NLA

I’m happy to assist further over the phone at https://www.6ya.com/expert/rolandw_c013176d62ee17ae

i NEED A REPLACEMENT VACUUM SNOUT FOR A 1990 TROY BILT CHIPPER-VAC. THERE IS NO MODEL NUMBER FOR THAT YEAR, ONLY DESIGNATED AS "MODEL 5 HP".

As there is a model number on the chipper there should be a model number on the engine. You may have to stand on your head to find it but, it's there.

Get in touch with [email protected] or 651-786-4277 he has parts new and used. Also does bag repairs

HI believe that we have a 47287 8 hp chipper/vac where would i find Model on chipper vac

You can get the impeller parts at:

http://www.thefind.com/garden/browse-troy-bilt-chipper-vac-parts

Good luck,.,

I just purchased a used 47261 yesterday for $200 .. It is like new, but I may need a new bag from this site and I will need to find a manual somewhere.

MrBill