Questions & Answers for: tecumseh carb

...too much fuel, not enough air mixture. If you have removed the carb and used carb cleaner with the carb and still no luck, then buy a NEW carb.  Tecumseh are bad for this , I do hope this

tecumseh HM80 engine, new carb, won't run changed the carb on my chipper engine, will only start with the main adjustment screw at about 3 turns and useing carb cleaner down the throat of the carb. ...

Tecumseh 17.5 hp ohv engine won't start I have cleaned fuel tank. Removed carb and sprayed out every oriface with cleaner and blew with compressed air. Gaskets are ok. Float bowl fills with fuel. ...

...how it goes. thanks jeff LOOK CLOSE ON THE CARB THERE SHOULD BE A NAME OR SOME LETTERS OF WHO MAKES THE CARB GO ONLINE TO TECUMSEH AND YOU CAN GET A CARB BREAKDOWN DON'T GO TO SEARS TO MUCH RUN ...

...carb that was fitted as original equipment. Following the demise of Tecumseh's engine division, supply is limited to 'old stock', but there is fair spares aqvailability at present. A newer 'primer ...

...carb for snowblower 7 hp. Tecumseh with 31840 rebuild kit what exactly do you want to know? Carb. mixture settings are as follows: L-head engines Tecumseh carbs.........mainscrew 1 3/4 turns idle ...

what causes gas to spit out one carb on 20p tecumseh i have cleaned and rebuilt the carb but its still slugish and spits gas out one carb Check and see iifthe float in the carburator is stuck open

tecumseh ohv165 has new carb,but runs only few seconds w/choke then stalls. I have changed plug, adjusted valves and replaced fuel supply lines/filter, along with the new carb. What could be problem? ...

...Tecumseh 8 hp but no gas is getting to the bowl. Gas is flowing from the gas line that fits on the main fitting on the carburetor. Sounds like the carb needle valve is stuck closed. Try loosening the ...

...to a dinky lawn mower shop,was told the carb was not the right one,wow,they sold me a used one that looked way different,but it worked super,so try another non-tecumseh carb or fight it