Hello, I can no longer get to my Dell 2300 settings page by using http://192.168.2.1. Please advise.

How to secure the wireless network

You want to secure the wireless network.
Is there any computer connected to the router with the Ethernet cable?
If not then you will need to connect the computer to the router with the cable.
Check the IP address on the computer. Open the router set up page.
Once you open the set up page, you will find the option to make it secured

The only way to reset the password if you can't remember the old one is to reset the device. To load the Dell TrueMobile 2300 Wireless Broadband Router's default settings, hold down the reset button on the router for at least five seconds. While the unit resets, the Power light blinks.
Then navigate to the router through your browser and Type the following as your username:
admin
Type the following as your password:
admin
Click the OK button.
The Dell TrueMobile Setup Page appears.

Click the Advanced Settings tab.
Click the OK button.
Click the Administration Settings button on the left side of the page.
Put a check in the box to the left of the Change Your Password setting under the section of the page titled Password Settings.
Type the password that you want to use in the New Password field.
Retype your password in the Retype Password field.
Click the Submit button.
Another window appears stating You have successfully submitted the settings to this device!
Click the Save and Restart button.
Your new password will be saved into the router settings.
This will however wipe all your settings!

You will need to check the wireless settings of the router .
Is there any computer connected to the router with the Ethernet cable?
If not then connect 1 computer to the router and open the router set up page. Once you open the router set up page, you will be able to find the wireless network key.
Use that password to connect to the wireless network

Click Here for step by step Instructions on how to find the network key

Configuring Your Dell™ TrueMobile™ 2300 Router for Gaming

Follow below steps to set up the router for gaming:

1. Select the system or systems to be used as game systems.
   
2. Locate the MAC address. For Windows 2000 and XP
   
   1. Click Start -> Run.
   2. Type cmd, and click OK.
   3. On the command prompt, type ipconfig /all
   4. Write down the MAC (Physical) address of your computer to configure for gaming.
      
3. Open the web browser, and type http://my.router (or http://192.168.2.1)
   
4. Click the Advanced Settings tab.
   
5. Click the DHCP Server Settings tab on the left navigation bar.
   
6. Click Add button in IP Address Reservation,
   1. Enter the MAC address of the system you wish to use for gaming in MAC Address field.
   2. Enter an IP address for the system (select a number between 101 and 254)
      
7. Click Submit.
   
8. Click the Port Forwarding Settings tab on the left navigation bar.
   1. To set a single computer for gaming, check the Enable DMZ Host box.
   2. Enter the IP address of the system at DMZ IP Address field.
   3. Click Submit.
      NOTE: Only a single computer can be set for DMZ service. To set multiple computers for gaming, please post your query again
      
9. Reboot the client system. The client system will use the newly assigned IP and will not have any TCP/IP ports blocked by the firewall feature of the router.

This is usually a router configuration issue. The router has to be configured to match your new broadband settings.

For example, your old DSL may have required some kind of login which was entered into the router. For most broadband cable connections, you set the router to get an IP address automatically.

Re-run the router Setup Wizard. You can download it here:

http://ftp.us.dell.com/network/R74885.EXE

Hi, logon to your router using IE or whatever browser. Then follow these steps and let me know.

You are prompted for a Username and Password.

Type the username: admin

Type the password: admin

Click the OK button.
The Dell TrueMobile Setup Page appears.

Click the Advanced Settings tab.
A note appears stating that Dell provides the advanced features for your convenience only. Dell technical support representatives can not support the configuration options in the Advanced Settings portion of the setup program.

Click the OK button.

Click the Administration Settings button on the left side of the page.

Put a check in the box to the left of the Change Your Password setting under the section of the page titled Password Settings.

Type the password that you want to use in the New Password field.

Retype your password in the Retype Password field.

Click the Submit button.
Another window appears stating You have successfully submitted the settings to this device!

Click the Save and Restart button.
Your new password will be saved into the router settings.

Hello,

YOu can refer to this site..they are all the same procedure in adding hard drive in a computer.


http://www.infohq.com/Computer/adding-second-hard-drive-review.htm

melnavz

Enabling the WEP for the Dell TrueMobile 2300 Wireless Router

Click the Start button.

Click All Programs.

Click Internet Explorer.
The Internet Explorer browser window appears.

Type the following in the Address line:
192.168.2.1

Click the Go button.
You are prompted for a Username and Password.

Type the following as your username:
admin

Type the following as your password:
admin

NOTE: If you previously changed your administrator password in the advanced settings of the router you will need type the password that you set.


Click the OK button.
The Dell TrueMobile Setup Page appears.

Click the Basic Settings tab.

Click the Wireless Security button on the left side of the page.
The Wireless Security window will appear.

For the highest level of security choose the 128 Bit encryption option.
You will have to type a name for your encryption key in the field to the left of the 128 Bit option.

Click the Save and Restart button on the left hand side of the page.
The Save and Restart window appears.

Click the Save and Restart button.
Your settings will be saved to the router.
More Secure
Configure the 2300 Wireless Router for WPA-PSK with TKIP Encryption.

Double-click on Internet Explorer.
The Internet Explorer window appears.
In the Address Bar type my.router or the default IP address 192.168.2.1.
Press the <Enter> key or click Go.
The TrueMobile 2300 password window appears.
Type the User Name and Password.
NOTE: The default user name is admin and the default password is admin.


Click OK.
The TrueMobile 2300 Wireless Router configuration window appears.
Click Basic Settings.
Click Wireless Security in the left-hand pane.
Click to select Enable Wireless Security.
Under Network Authentication, select WPA (Wireless Protected Access) from the drop-down menu.
Input a network key or password in the field to the right of WPA Pre-Shared Key.
NOTE: Your network key or password can use 8 to 64 characters using Hexadecimal digits or 8 to 63 characters using ASCII characters.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Buy a new one here for $10

http://cgi.ebay.com/NEW-DELL-DIMENSION-2350-2300-CASE-FAN-92mm-x-25mm_W0QQitemZ250245854784QQcmdZViewItem

If you are able can you reset the router in any way normally little reset button on back, or get into the routers set up page and try a restart.