Can i change the battery in my baum & mercier acier inox watch or do i have to take it to a dealer.

Just replace with the same number battery that came out of it.. If you give me the numbers I,can tell you what the new equivalent is

It may be that the crown needs to be unscrewed before being able to pull it out.

Try turning the crown anticlockwise about 1/4 of a turn, then pull.

Follow this link and find the nearest to you:
http://www.baume-et-mercier.com/retailers?type=2
There is no other way to find the pieces you want.
Rate me please.

mcdevito75 here, Best bet, look for a small watch repair shop in your area for a new strap.

mcdevito75 here, Yes and No, While any sharp, sudden, or very hard motion of your hand, wrist or arm can hurt a watch, it seldom does, most of the time you"d have to actually bang the watch against a hard surface, Wall, Floor etc to effct the movement, and usually you just scratch the crystal or caseing. .

mcdevito75 here, best Bet, visit a jewelery shop in your area, they may be able to order a new manual for your watch.

Does the dial have "Automatic" wtitten on it". If it does then it's a mechanical movement. If it has "Quartz" then it requires a battery. If the watch isn't running perhaps it just needs a battery. This may also explain why the pushers aren't working. If it's mechanical the watch needs to be wound before the pushers will work. What are the markings on the subdial.

379

What do you need to know?

The hands must be adjusted.fairly easy fix