I do not seem to be able to take more pictures. I know that there is a way to clear it, but can't find the info.

Sounds like a T-Con board is bad. Check you tube with your tv info and how to repair. You tube has detailed info and videos.

Most webcams can be focused manually. Try turning the plastic ring around the lens. I would need more info about the sluggishness of the tracking problem. Perhaps you need more RAM added to your computer.

Hi
Check the componet cables if you are using them for video from the cable box, the red may of came loose.Also you could have intermittent connection the video processor IC or as we techs call it the jungle IC. It is responsible for producing all the small singals used by the set.Tapping with the handle of a screwdriver on the signal board may lead you

The flash is suppose to help with the lighting situation in order to lower the chances of you taking blurry pictures. Usually indoor pictures must have the flash go off in order to get clear pictures. If your outdoor pictures are also coming out blurry then you probably have some problem with the lens. My first suggestion is for you to go into the menu and reset all functions to default. You will have to read the manual to find which menu it is in, but I guarantee you that it is in the camera menu. If the reset does not fix your problem then the lens is probably out of position or damaged in some way. You would need to send into an authorized service center for repairs if this is the case. I know that Photo Tech in NYC is authorized for Nikon repairs. www.phototech.com is the contact info.

Good luck
Paul

Hi,
Image curve, it seems tv got problem with convergence output ICs failure.
Do you get off color picture or like 3 pictures in tv screen?
Is it Sony KP-57HW40 rear projection tv?
Let me know above info to provide you helpful info to solve this issue.
Thanks.

Ur convergence is dead.Must replaced 2 convergence ICS and all it resistors.The shop well cost u $300 for parts and labors.If u Know how to solders?Buy aconvergence kit at Tv repair World.com,Tvrepairkits.com for parts repair it ur self.

It seems problem of bad ccd imager chip in your Sony camcorder.
let me know exact model number written at bottom to provide you more info.

Did you try to use a different
card?

u need to set ur cam in the factory defaults^^

Sir,
We have solve this problem by resoldering the power supply and vertical section.In few cases we have seen mains filter capacitor in power supply also defective.