Operating Instructions diesel DZ7069 Watch

click link below to download manual
http://www.umlib.com/brand/Diesel/category/Watch/model/DZ7069

this link is the instructions go to page 2
http://store.dieseltimeframes.com/wcsstore/CommonDiesel/instructions/ENGLISH/Diesel_Digital-Guide_ENG.pdf

Hi i have found a PDF document containing instructions for the entire range of Diesel's core collection of watches and yours is included in the list at the start the PDF can be downloaded from here

Hope this helps

Click on my profile (escapement), then click on Tips and Tricks. There you will find links to all watch manuals. Rate me, please .

BUY ONE ONLINE

ok ,here it is .
Instructions To Set The Time On The Diesel DZ7071 Watch

Ok the first and most important thing to know about this watch is that it has an unusual timezone function (unusual to me at least). This allows the watch to display two different times. Time 1 (or T1) is the primary time (the time of the place where you spend most of your time!). The time can only be adjusted whilst the watch is in the T1 mode (T1 should be displayed in the bottom left corner of the screen). Holding down the top right button for one or two seconds will temporarily replace the current T1 time with the T2 time. Holding down this same button for several seconds will toggle the current time mode to T2 and the watch will continue to function in the second time zone until you toggle it back to T1.

The second most important thing to know is that you can only set the time whilst in the T1 mode. When in T1 mode hold down the top left button until the watch enters the settings menu (it should say "Light" at the top of the screen) now use the bottom left button to toggle through the settings menu until you get to the time settings. I think this part of the process if sufficiently straight forward so I'm not going to go into more details here, all I'll add is that once you have the watch set to the desired time mode 12h/24h time and date you just need to press the top left button to save the settings and return to the main time screen.

To set a secondary timezone time you have to first toggle the watch to the secondary time zone mode (hold the top right button for several seconds and the T1 indicator should change to T2 (and the watch will now be displaying the time that is currently set for the secondary timezone). This time is based on the primary time by simply telling the watch a number of whole hours ahead or behind the primary time. To adjust this hold down the top left button for several seconds, the watch will then say "offset" now use the buttons on the right to add or subtract hours from the primary time. Once set press the top left button again to return to the main time screen. Finally hold down the top right button for several seconds once more to return the watch to the T1 mode.

Contact Diesel by email or phone.
Diesel Time Frames Customer Service
2280 N. Greenville Ave.
Richardson, TX 75082
TEL: 800-699-2556
[email protected]

Hi for instructions go to http://store.dieseltimeframes.com/text/content/diesel/DieselENGLISH.pdf
find your model, and, hopefully solve your dilema

This link has all the instructions for all the diesel watch movements

http://store.dieseltimeframes.com/text/content/diesel/DieselENGLISH.pdf

I finally figured out how to set the time on this watch! Like others the included manual didn't have instructions for this model.

Hold down all four buttons on the watch, this will do a factory reset.

Hold down the top left button, which brings you into the configuration mode.

Pressing the bottom left button will cycle you through all the settings for the time. For each setting, the top right button increments and the bottom right decrements.

When you are done, press the top left again.