Fs 4159 sudennly stopped working - Fossil Arkitekt watch

Try http://www.watchstation.com/webapp/wcs/stores/servlet/ContentView?langId=-1&storeId=34054&catalogId=23503&page=customerCare_watchInstructions&nav=leftNav_CustomerCare

I have the same watch with the same issue, .. I don't want to have to junk a good watch, .. hope someone can help.

You will have to remove the back off the watch (cant take off the face). You MIGHT be able to access the hand from there, but you may have to adjust some of the watch inner movement and that will be risky but you can try.
Goood luck

You can get instructions for your watch from the Fossil web site.

Go to "fossil.com", go to the bottom of the page and you will see a menu, click on "customer care", and then look under "Product Info" on the left and you will see "watch instructions"

Click on this and a list of diagrams and watch descriptions will appear,Download the file that is suitable for your watch.

If these instructions do not include bland shortening, then you could either try your local watch shop (if you haven't already done so) or use the web site to locate your nearest dealer.

You have to open your watch, take out stem completely, then take out whole movement and release the stone. I you have steady hands, nimble fingers and a pair of tweezers, you will be able to refit the stone using Superglue.

It isn't a fault and can be adjusted. Follow this link and find out how to.... http://www.invictawatch.com/ Point at COLLECTIONS and click on INSTRUCTION MANUAL. If you don't know which one of movement makes you have, try both (RONDA first, then MIYOTA). When sorted with type of movement, check how to reset chronograph to 0 (zero).
Rate me, please.

I have the same watch Fossil FS-4127 and I too can't find a replacement band. Appears to be planned obsolesence by Fossil. This FixYa site is almost as bad as Fossil, which is all advertisements and no answers whatsoever.