Need a mic for a midland 79-892 SSB Radio or at least the 6 pin mic plug

Question edited for clarity.

https://www.transmission1.net/viewtopic.php?t=58817

Or Paper copies

VHTF MIDLAND 78-999 AM/SSB Transceiver Owners ...

eBay https://www.ebay.com > Manuals & Magazines

A great manual for the classic 78-999 AM/SSB CB base station which is a Legend ... VHTF MIDLAND 78-999 AM/SSB Transceiver Owners Manual with 5 Schematics!
US$29.95 · ‎In stock

• 
  

  1979 MIDLAND CB RADIO SERVICE SHOP MANUAL ...

  https://www.ebay.com > ... > Radios > Manuals
  
  Photofact CB Radio Series service manual pages for the 1979 Midland model 78-999. It has 46 pages and is dated 7/1979. Pages are loose.
  Shipping speed: 5.0
  Brand: SAMS US$49.99

Midland 78-999 AM/SSB CB Radio Owners Manual w ...

eCRATER https://theclassicmint.ecrater.com > midland-78-999-a...
Complete OPERATORS manual with schematics. This is not a service manual, this is the owners manual the radio came with. As shown, mint condition as NEW.
US$31.95

Are you sure its a midland 38 and not a cobra 38HH

the best i can find is this
red pin 5 ptt
black pin 4 ptt ground
white pin 1 mic
shield pin 2 mic ground
no connection pic 3

here is the pin outs.. look at the switch in the mic handheld housing.. and attach as the one shown for midland 4 pin. this will work with any radio. and doesn't matter which color is what.. as long as the wire on the switch matches the wire on the pin correctly.

for what model midland radio. there are several.

Your midland CB will use a standard 4 pin wired CB plug which is most common for most mics sold today. Your power cord will be a standard 3 pin CB power cord which again is most common with CB's today. You need not purchase a "radio specific" cord or mic. Cobra, Uniden, Midland all the same mic pin out and power cords. Good luck.

This is never a good sign. This is usually a sign of a bad final.

If the radio doesn't transmit in SSB or AM, then it either means, Both finals are bad, (which is rare) or there is another problem causing the problem.

If it transmits in SSB, but not AM, then the AM final is blown and needs to be replaced. Its a job for a tech.

If both SSB and Am are not working it needs troubleshooting by a tech.

If you feel ambitious, you can pull the bottem cover off being careful of the speaker wires and make sure the TX section is connected.

Inside the radio, there will be one wire with a plug that is hooked to a pin near the center of the radio. And an empty pin. The empty pin is the test pin, ignore it. Make sure the plug is on the pin all the way, and not loose. If its on good, then it needs further troubleshooting.

Other things you can check:
Make sure the mic works.
Make sure the mic gain is up.

This should be a typical Midland pinout. If you are using a generic 4 pin mic that is wired to cobra/Uniden, all you have to do is switch pin 1 & 2, then 3 & 4.

Not all mics are color coded the same with their wires.

NO. I SORRY. YOU COULD GET IT FROM THE MANUFACTUREE. THANK YOU