Soundesign 316G Jukebox Alarm Clock-can't set alarm

OEM radio issues. Flashing Time. Radio Not Working... - Drive ...

www.driveaccord.net/.../51717-oem-radio-issues-flashing-time-radio-not...

Sep 20, 2010 - When I reconnected the battery, the radio does not work anymore. ... I reconnected it, turned the key and the clock is still flashing. ... Wait about three minutes or so, and reinstall the fuse. .... Please let us know what it was. .... Naviscreen comes up but I can't do anything with it because the buttons are dead.

Novelty Simpson Jukebox Alarm Clock Radio Homer ... - Fixya

www.fixya.com/search/p94498-novelty...clock/welcome_please_wait
Novelty Simpson Jukebox Alarm Clock Radio Homer Simpson Animated Jukebox Alarm ... ...welcome Please Wait" Every time I try to use any handset the screendisplays ... This keeps flashing for several minutes, and never seems to resolve.

Troubleshooting - Shop - SiriusXM Radio

You can get all kind of Soundesign Jukebox Alarm Clock manualshere: http://manuals-market.com/search.php?cmarque=PERFORMANCE%20TEKNIQUE&modele=ICBM%20779. After clicking this link you will be forwarded to a page contains aform. You need to fill up that form. Most of them are pre-filled. You need towrite "Soundesign" in Brand box and model number in "model number" box. Please don't forget to mention "Jukebox Alarm Clock" in the"description box". Finally accept their "terms and condition" and click on"search" tab. Hope this will help you. Good Luck.

On my Elgin alarm clock, you just push the nap button and it will add 15 minute increments for a nap. I haven't figured out how to turn it off if I change my mind or wake up earlier than I set it.

With the power off, push the alarm 1 button, then push the clock set button. Use the skip & preset buttons to set the hour. Push the clock set button again to change to the minute. Again use the skip & preset buttons to set the minute. Push the clock set button again to set. You will see an alarm clock in the upper left of the screen to show the alarm in now set. To cancel push the alarm button and then the stop/alarm off button.

The settings on this clock were difficult to figure out even with the manual. I made a lot of notes in the manual to help myself each time I had to reset the clock and CD Alarm. See Attached .pdf.

On the manual below on page 7 and 8 will tell you how to set the alarm.

http://www.manualsonline.com/mdownloads/64580048-2a62-445b-b8f9-911293790997.pdf

Good Luck and please rate 4 thumbs up for the free answer

simply call the manufacuter and have them supply you with the instructions go online for their phone number

Go to timexaudio.com, select SUPPORT, then select PRODUCT MANUALS.

To Set the alarm time: Press and hold the ALARM button down, and then press the hour/minute buttons to obtain desired time (Note the PM indicator on the screen for PM times)

To Enable the alarm: Move the sliding switch to AUTO or ALARM (Auto is for radio wake and Alarm is for beeping noise) *remember to turn up the volume knob if using AUTO (radio) setting.

When you set the alarm you pressed aburron that said 'radio' and/or 'buzzer' then programmed the time. Just press the buttons again and the alarm will no longer sound. Looking at the dial at the top of the lcd screen you will see the word buzzser or radfio if the alarm is enabled. Pressing buzzer or radio on the side will remove the word and no more alarm!!

Luck----