Where can i find on the internet a questionaire and answers provided for the subject Applied statistics?
If the new firmware is applied, I
believe that the engine code has been updated too.
After the code update, you will need to
force a calibration.
a. Press Menuon the printer's Op panel.
b. Look for Settings.
c. Select Quality
Menu.
d. Select Color
Adjust.
Note - Some cartridges may trigger toner low
soon after a few (maybe 20 or more) pages have been printed, this should be expected.
If the long calibration persists, look at the Page
Count for each
cartridge by printing the Device Statistics page.
Note: If
you are unable to print, you may check the page count using the printer's Embeded
Web Server (EWS).
a. Launch the Internet
Explorer browser.
b. Type the IP
address of the
printer.
c. Click on "Reports."
d. Select "Device
Statistics."
If any of the Page
Count is close to
the expected yield (example: 8500 page count for a 10K yield cartridge), but
the device statistics, says 'OK'
in Supply Levelor it reports FULL on the Status/Suppliesfrom the printer's Op
panelor Supplies
Menu. Replace the cartridge with a new
one of the same yield.
For further assistance, please contact Lexmark Technical Support.
83 views
Usually answered in minutes!
×