I DO NOT KNOW HOW TO SET THE TIME ON THE CLOCK. PLEASE HELP PIONEER DEH=P6700MP SUPER TUNER

Mosfet 50wx4 indicates a feature of the Pioneer car radio. It isn't a model number. One Pioneer car radio/CD player with this feature is the DEH-1500. On this model, you need to turn off the unit to set the clock. Press and hold the Source button (to the left of the preset tuning buttons) until the device turns off. Press Audio (upper right corner) repeatedly until the clock appears in the display. Use the arrow keys (Skip/Back or Left/Right) on the right hand side of the radio to select a segment of the time to adjust. Use the Up/Down arrows to set the current time. Repeat choosing the time segment and adjusting the time until both the hour and minutes are correct. Press Band or press and hold the Audio button to exit the clock setting mode.

ManualsLib has the manual for the Pioneer DEH-1500 here: https://www.manualslib.com/products/Pioneer-Deh-1500-Car-Cd-Player-Mosfet-50wx4-Super-Tuner-3-Am-Fm-Radio-3432555.html . See page 16 for the clock setting procedure: https://www.manualslib.com/manual/129844/Pioneer-Deh-1500.html?page=16#manual . See page 6 for the picture of the front-panel buttons for the DEH-1500.

I hope this helps. Please add a comment with the model of the car radio if the above procedure doesn't work for your unit.

Cindy Wells

here's a link to THE DEH-P6700MP manualpage 41 to set your clock.

Is THIS your model?
If so the installation manual is HERE.The Owner's Manual is HERE.

Did you try putting the radio in standby mode?

try putting the radio in standby mode first.

Here's a link to the DEH-6700MP manual:

http://fitness.manualsonline.com/mdownloads/e9ea0982-854f-cef4-edd6-86295158c9cb.pdf

How to set the clock is found on Page 41.

That should work for you...

Press the FUNCTION button and select the time setting mode (CLOCK) in the Initial Setting Menu.

Select "Hour" or "Minute" with the <- and -> buttons

Set the desired time with the UpArrow and DownArrow buttons

Press the FUNCTION button when the desired time is displayed.



This is from page 42 of this user's manual.

If this helps, please be sure to hit the "thumbs up" for me!

Press and hold down the "clock" button. You should see your time start flashing. Normally you set the time with the volume or channel control. Check which control lets the selector jump from "hou" to "minute and set the minutes. To exit setting menu, depress "clock" button again

hi.. here is the link to a user manual for you, hope it helps..
http://lee.org/blog/archives/2005/05/18/new-car-stereo/

this is the manual.. let me know if you need anything else..d

here is the link for pioneers web site. it has the manyal in pdf form. http://www.pioneerelectronics.com/pna/v3/pg/support/details/0,,2076_310070339_150552934,00.html or press function until clock appears.then press the right or left arrow to select one of the display segments. press the up or down arrows to adjust the time. good luck.