I accidentally erased the flders that appear on the computer when i connect my mp4 how can i get the back in order for me to be able to use it again it's an MP4 Titain 4GB

Hello

The Internet is full of great places to find MP4 downloads. Check out sites such as iTunes to find a video or file you like, and then click the download button.

A dialog box will appear reading, "You are about to download the file "name_of_file_you_are_downloading _will_appear_here", are you sure?" Click "OK" to start downloading.

A File Download pop-up screen will appear again, asking "Do you want to open or save this file?" Click the SAVE button to save the file to a specific location on your computer (be sure to remember where you save it!).

Once you've saved the file to your computer,connect your mp4 player to your computer,go to "my computer"you will see your mp4 player among the list of drives.Click to open the drive then you can click on the file you downloaded and drag it to your MP4 player and enjoy!

If the file you've downloaded isn't in the correct format for your player, you may need to convert it before adding it to your MP4 player. Basically, you'll repeat Step 3, and save the download to a file on your computer, then convert it and add it to your MP4 player. See your instruction manual for details, or search the internet for a free MP4 converter to reformat the file. This process is quick and easy and should only take a few quick mouse-clicks.

Good luck

I format my mp4 through my computer & when the mp4 suddenly freeze, I just have to connect it to another USB cable to my computer & it'll start working again. Basically, you need 2 'USB cable' to interchange if your ASK mp4 start freezing.

Your younger brother should be doing your chores for the next month to repay you for wrecking your Mp4 player - I am guessing formatting it erased everything including the operating software.

The Mp4 player like most things is a small computer and computers are just so much junk if they don't have an operating system.

I fear your player will remain junk unless you can find a suitable operating system and persuade the player to accept it.

I suggest you contact the supplier for advice in the first instance, you could be lucky and find them helpful.

If that fails then asking around all the nerds and boffins you might know of could produce results, as could some general online research.

Triple Reset for Philips’ GoGear:

Disconnect the Go Gear from computer. Press the reset pinhole until the player turns off. Hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. If this pop-up does not appear, reset the player again WHILE connected to the computer. Open the Philips Device Manager, and go to Repair Tab. Reset the player one more time while connected to computer. Follow the repair instructions.

After repair is complete, upgrade the firmware for this player. Will erase all the songs, but you should be good to go again.

-Tha Mp3 Doctor

Triple Reset for Philips’ GoGear:

Disconnect the Go Gear from computer. Press the reset pinhole until the player turns off. Hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. If this pop-up does not appear, reset the player again WHILE connected to the computer. Open the Philips Device Manager, and go to Repair Tab. Reset the player one more time while connected to computer. Follow the repair instructions.

After repair is complete, upgrade the firmware for this player. Will erase all the songs, but you should be good to go again.

-Tha Mp3 Doctor

Make sure the hold/lock switch is not engaged - critical!

If the hold switch is definitely off:
Triple Reset for Philips’ GoGear:

Disconnect the Go Gear from computer. Press the reset pinhole until the player turns off. Hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. If this pop-up does not appear, reset the player again WHILE connected to the computer. Open the Philips Device Manager, and go to Repair Tab. Reset the player one more time while connected to computer. Follow the repair instructions.

After repair is complete, upgrade the firmware for this player. Will erase all the songs, but you should be good to go again.

-Tha Mp3 Doctor

Make sure the hold/lock switch is not engaged. If you are running Windows Vista, you need to get the upgraded software from Philips website. If all else fails:
Triple Reset for Philips’ GoGear:

Disconnect the Go Gear from computer. Press the reset pinhole until the player turns off. Hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. If this pop-up does not appear, reset the player again WHILE connected to the computer. Open the Philips Device Manager, and go to Repair Tab. Reset the player one more time while connected to computer. Follow the repair instructions.

After repair is complete, upgrade the firmware for this player. Will erase all the songs, but you should be good to go again.

-Tha Mp3 Doctor

If your PC is running Windows Vista, don't even think about conencting it until you get the firmware upgrade for the device.



Triple Reset for GoGear:
Disconnect the Go Gear from computer. Press the reset pinhole until the player turns off. Hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. If this pop-up does not appear, reset the player again WHILE connected to the computer. Open the Philips Device Manager, and go to Repair Tab. Reset the player one more time while connected to computer. Follow the repair instructions.

After repair is complete, upgrade the firmware for this player.

Will erase all the songs, but you should be good to go again.

-Tha Mp3 Doctor

ok...here goes...

go to "My Computer"

Right-Click the "Removable Disk" icon, and scroll down to "Properties"

click "Properties" and another window will appear. There are Tabs at the top of the window. click the "Tools" tab.

select the "Check Now" function located next to the "Error-Checking" option. ANOTHER window will appear.

select "Automatically fix file system errors" and click "Start".

This takes around 15 seconds and usually fixes the problem. you will then be able to add/delete files in the MP4 player.

try formatting it, connect it to your computer, preferably usb, then in 'my computer' right click on that drive and select 'format'. make sure you save your data before you do this though or it will erase it. hope this helps you. good luck! :)