I have an Onkyo SR803 Receiver and Samsung BD-P1590 Bluray DVD Player. The remote control code given in the SR803 Manual for Samsung DVD player (0600) is not working. I tried various other codes from the manual but nothing is working. Can some one help me with the remote code?
Thanks,
Ramsri
Your Onkyo remote doesn't have any Blue-ray disk player codes. These codes aren't the same as the DVD player codes. This receiver was manufactured in 2005. The Samsung BD-P1950 was manufactured in 2009. Universal remote codes usually don't include devices that were manufactured less than 6 months before the remote was programmed at the factory.
You would have better luck using a newer universal remote with TV, Audio and BD-player support. (Any remote made after 2010 should work for most features on both the receiver and the BD-player.)
I wish that I had better news for you.
Cindy Wells
(If the Samsung BD-P1950 remote supported more devices than just the TV, I'd suggest using that instead.)
This should help you.
http://codesforuniversalremotes.com/samsung-blu-ray-player-remote-control-codes/
SOURCE: Code for Sony BDP-S300 Blu-ray player on Onkyo remote
Player can be made to work without remote. But it is a pain.
You need to press pause then play in the right combination.and you can get both DVDs and Blu Ray disks to work. I bought a store floor model that did not have a remote. I went through the same problem when I would lose the remote for the HD-DVD player. My four year old daughter knows this trick pause pause play for DVDs and pause play pause play for blu
SOURCE: i need the remote control code (for onkyo receiver
Philips Blu-Ray player codes for Onkyo universal remotes are: 33007, & 33016.
You can download Onkyo universal remote codes with
instructions here.
I hope that helps.
SOURCE: I own an Onkyo av receiver and I want the remote
Samsung Blu-Ray player code for Onkyo universal remotes is 33001.
You can download Onkyo universal remote
codes with
instructions here.
I hope that helps.
SOURCE: I have onkyo receiver model
I have heard
several complaints about this problem. Unfortunately, none of those codes work for the blu-ray player. I also ask Samsung Techs product support, and was told the TV remote cannot be
programmed to run the blu-ray.
Just contact with the service in your zone and buy new one, the price really is very short and solve the problem so fast. I suggest contact directly with the Samsung Support.
I'm sorry sendn more details about this, but hope helps.
SOURCE: How do I hook up
Usually, you would hook the blu-ray player to the hdmi input of the receiver and it would pass through to the hdtv's hdmi input.
The following interactive guide can help to hook up the devices in question:
http://esupport.sony.com/US/perl/tutorial-display.pl?tut_id=438&mdl=STRDG800
or the quick set up guide:
http://www.docs.sony.com/release/STRDG800_install.pdf
I hope this helps.
1,075 views
Usually answered in minutes!
×