AVR 1508 Reciever Setup Issue

Check your setup
setup > hdmi setup > hdmi audio setup > HDMI audio out = AMP

Try this, although recivers have video pass through, it is not the best option for video to your monitor. Depending on what you have for input/output on your TV/monitor, and, if you can, you should run all your video components directly to TV via(best)HDMI(video and sound) or, component and digital optical(best) or RCA, Then run digital optical out from you TV out to receiver in. You can use your monitors menu to chosse what you view and only have the onr input to you reciever. ASll you have to do then is go through you recievers menu to get the audio. Less connections less hassle. In other words, you would run your sat tuner to tv inputsat or cable, then dvd to dvd, PS3 to video 1 etc., on TV/monitor, then the single audio output to reciever.
Dave

Depending on your TV inputs, you are better off to run video componenets through TV first then, connect TV to reciever via digital optical. Recievers have video pass through but, noyt the best route. You can use TV's menu to choose what you watch and, only have the one output from TV to reciever. Make sure you scan through TV and reciever menus to make sure you are selecting the right channel.

Coax-2 is audio. Where's the video from the cable tuner coming into the Denon?

Why don you need the cable to pass video through the Denon on iuts way to the TV anyway? Interconnnects rarely add value.

you need more power

I took the docking station back to the store and bought apple tv instead.

Azahid

Since you are running the to LCD monitor instead of a LCD TV this is where you run into the issue. because the monitor is not setup to pull out the audio from the HDMI connection. So there is a few ways that you maybe able to to this.

The first one is look around at the different output cables out there the PS3. (I just got one so I do not know the accessories that are out for the PS3) This is becoming a common setup so if Sony does not have cable that will split off the audio then a 3rd party group may. I know they have one like that for the XBOX 360.

Another you can try is if your monitor will except an analog connection you may need to go that way. That is how I have my XBOX 360 that is my room connected. I have a RBG HD to VGA connect the VGA input on the monitor and the audio going to my sound card.

The reason why I suggested going analog is that right with our curent technology that if you are run with the 2 formats at the same time you will get audio/video sync issues. So you need to go all analog or all digital.

I hope this helps. Let me know if you have any other questions on this and/or need me to clarify anything.

Issken

Just click and choose whatever connection you want;


DVD Players/Recorders: Home Theater Setup, Installation & Hook Up ..

• Audio and Video Connection Guide
• What is HDMI Technology?
• HDMI Explained in Detail
• Audio and Video Definitions

Plasma or Video Projector Wiring Guide

Blue-ray Surround Wiring

lingbox HD Connect

Shopping results for multi connection sling box


hope this may help;

Regards,
VOTIT

DON'T TO FORGET TO RATE

This reciever does not decode the audio through HDMI, the HDMI ports are simply a pass-through. To get audio you need to connect an optical audio cable from the PS3 to the reciever also. I figured this out after 2 hours of trying to get audio from the HDMI cable. Here is a link that shows the different audio formats supported through HDMI by the different Denon models. It looks like the AVR-788 is the lowest model that supports audio through HDMI. Hope that helps.