Does the lg treasure have a memory card slot?

Remove the back cover by holding the phone firmly then slide in the back cover of the handset. You will now see your MicroSD and SIM card slots. Take your SIM card and slide it into the slot provided with the chip facing down. You will also see a small diagram showing you which way to insert the SIM card. Now slide open your MicroSD memory card slot gate, pop your MicroSD memory card into the slot, then close the MicroSD memory card slot gate by sliding it forward then backwards.

Take off the back cover of the phone. Beneath the SIM card slot, there is another slot, which is used for memory card. Insert the card in that slot.

hello,kindly check if it is inserted properly,you will see a directive arrow on the memory card to show you how it is to be inserted,if after you have inserted it correctly and it still does not sees it,i would suggest you suspect your memory card is corrupt if their is any message displaying on your mobile phone screen,and if it does not show any message like memory card corrupted,then you will have to visit a mobile phone repair expert to help you change the memory card slot,after this your mobile phone will now read your memory card.

kindly rate this solution if it's helpful,

take care.

Hello.

Insert the memory card into the slot until the memory card is fully inserted into the slot. Note that the gold connectors must be facing down and inserted first into the memory card slot.

Hope this helps.

Have you tried to insert it the upside down? Try it. You may be inserting it the other way round. So try both ways and one of them is bound to work. LG can not make such a mistake as to make the slot different for the card.

This happened with my phone as well. I put the memory card in a blackberry and was able to format it. It worked fine in the LG after thath. Please note that this will erase everything on your memory card.

the memory cad slot is localed under the sim card slot.

there is no slot for the lg cu400 only the lg cu500 haz it

try this.....
type 277634# * # (no spaces)
click port setting
click mass storage
click mass storage remove
go back to main screen and check again for memory
if this doesnt work,take out memory card and try without the memory card.