Emerson LF501EM4F schematic - Emerson Televison & Video

cooling fan fault for the bulb

I don't have the manual in front of me but go to menu on the TV and you should be able to get into it there, if not I can look later at the manual and tell you how to do it

Based on Emerson reviews, you might be better off buying another (maybe different brand) TV.

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

hi this could be either a tcon board fault or a bad panel, thanks

shaun

Emerson brand is not one of the best out there, I suggest you not spend another penny on this and replace it and limit the bleeding.

there's a software upgrade on emerson's site that corrects this problem.

how do i connect a polk soundbar to an emerson LF501EM4F

Take it a good photo, front and rear, might look for mount holes. Measure separation of holes, then go to a home depot and ask them. They know all about how to mount a TV set on wall